ETM-Schurig
/
powersync-plugins
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
powersync-plugins/zigbeephilipshue/README.md

3.5 KiB
Raw Blame History

ZigBee Philips Hue

This plugin allows to interact with Philips Hue ZigBee devices using a native ZigBee network controller in nymea.

Supported Things

In order to bring a ZigBee device into the nymea ZigBee network, the network needs to be opened for joining before you perform the device pairing instructions. The joining process can take up to 30 seconds. If the device does not show up, please restart the pairing process.

Hue motion sensor

The Hue motion sensor is fully supported. The time period for the present state can be specied in the thing setting.

Pairing instructions: Open the ZigBee network for joining. Press the setup button for 5 seconds until the LED start blinking in different colors.

Hue outdoor sensor

The Hue outdoor sensor is fully supported. The time period for the present state can be specied in the thing setting.

Hue dimmer switch

The Hue dimmer switch is fully supported.

Pairing instructions: Open the ZigBee network for joining. Press the setup button for 5 seconds until the LED start blinking in different colors.

Hue smart button

The Hue Smart button is fully supported.

Pairing instructions: Open the ZigBee network for joining. Press the setup button behind the back cap for 5 seconds until the LED start blinking in different colors.

Hue wall switch module

The Hue Smart button is fully supported.

Pairing instructions: Open the ZigBee network for joining. Press the setup button on the back for 5 seconds until the LED start blinking in different colors.

Hue lights

Most of the lights and lamps from Philips Hue should be handled in a generic way by the nymea-plugin-zigbee-generic-lights plugin. There are 2 methods for bringing a Hue light / bulb into the nymea ZigBee network.

  1. Use a Hue dimmer switch (most reliable):

    • Open the ZigBee network for for allowing new devices to join the network.
    • Switch the lamp off and on again (take the power).
    • Take the Hue dimmer switch and press the On and the Off key at the same time
    • Hold the switch close to the lamp while keep pressing both buttons (less than 5 cm).
    • Keep holding an pressing the buttons until the lamp starts blinking multiple times.
    • Once you release the buttons on the switch, the lamp should be resetted and start joining the nymea ZigBee network.

  2. Remove the lamp from an existing Hue Bridge setup.

    • Open the ZigBee network in nymea for allowing new devices to join the network.
    • Remove the lamp from the Hue Bridge using the official Hue App or nymea.
    • The lamp should now be resetted and start joining the nymea ZigBee network.

Requirements

  • A compatible ZigBee controller and a running ZigBee network in nymea. You can find more information about supported controllers and ZigBee network configurations here.
  • Optional: Hue dimmer switch for resetting lights and bringing them into the nymea ZigBee network.

More

Philips hue