1.7 KiB

Raw Blame History

One-Wire

This integration plugin allows to integrate one-wire devices like temperature sensors and switches.

Supported Things

OWFS Interface
- Gateway device
- Initializes OWFS
Temperature Sensors
- Family Code 10
  - DS18S20
  - DS1820
  - DS18S20-PAR
  - DS1920
- Family Code 22
  - DS1822
  - DS1822-PAR
- Family Code 28
  - DS18B20
  - DS18B20-PAR
  - DS18B20X
- Family Code 3B
  - DS1825
Temperature and Humidity Sensors
- Familiy Code 26 *DS2834
Switches
- Family Code 05
  - Single channel switch
  - DS2405
- Family Code 12
  - Dual channel switch
  - DS2406
  - DS2407
- Family Code 3A
  - Dual channel switch
  - DS2413
- Family Code 29
  - Eight channel switch
  - DS2408

Usage

OWFS Interface

First step is to setup the "One wire interface". During the device setup it is required to enter the OWFS init arguments. Default arguments are "--i2c=ALL:ALL", means OWFS is about to scan for one-wire bus masters on all I2C interfaces.

You can simulate one-wire device with following init argument: "--fake=10,22,28,05"

More about init arguments here: https://www.owfs.org

W1 Kernel Driver

Install the kernel driver w1. Raspberry Pi users can use rasp-config to enable 'one wire' which enables W1. There are not further steps necessary, temperature sensors will be discovered if the driver has been loaded successfully.

Requirements

The package “nymea-plugin-onewire” must be installed.

This plug-in uses "OWFS" the one-wire file system: https://owfs.org

1.7 KiB Raw Blame History