ETM-Schurig
/
nymea-plugins-modbus
mirror of https://github.com/nymea/nymea-plugins-modbus.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
nymea-plugins-modbus/amperfied/README.md

946 B
Raw Blame History

Amperfied - Heidelberg

Connects nymea to a Amperfied/Heidelberg wallboxes. Currently supported models are:

  • Amperfied Energy Control
  • Amperfied connect.home
  • Amperfied connect.solar
  • Amperfied connect.business

Requirements

nymea requires the use of a firmware greator or equal version 1.0.7 on the wallbox.

Amperfied Energy Control

The Amperfied Energy Control is a Modbus RTU device. This means it must be connected to the nymea system using an RS485 port. The Modbus RTU must be configured with a baud rate of 19200, even parity, 8 data bits and 1 stop bit. In order to allow nymea to automatically discover the wallbox on the bus, the Modbus slave ID must be in the range of 1 - 20. If a higher slave ID number is required, the manual setup is to be used.

Amperfied connect.home/solar/business

The Amperfied connect.home is a Modbus TCP device. This means it must be connected to the same network the nymea system is in.