jenkins
d5df291bf3
Merge PR #80 : Rework the reachable refreshing and manual LQI/RTG fetching
2023-02-21 17:42:44 +01:00
jenkins
366414776b
Merge PR #79 : TI: fix reconncting the controller at runtime
2023-02-21 17:42:43 +01:00
jenkins
2f4ee53287
Merge PR #77 : Fix a typo in ClusterIdOnOffConfiguration
2023-02-21 17:42:41 +01:00
jenkins
c073b0a0c3
Jenkins release build 1.6.3
2023-02-01 12:17:22 +01:00
jenkins
6195cc37d8
Jenkins release build 1.6.2
2023-01-16 14:35:03 +01:00
Michael Zanetti
22837865f1
Fixes reconnecting the ZigBee controller after a reset during runtime
...
Resets may occur by unplugging the stick or calling a softReset() from
the software side.
Additionally resets the stick when 5 subsequent timeouts happen
as there are firmwares of the CC2652 available which tend to
crash occationally.
2022-12-30 20:49:45 +01:00
jenkins
0f18424d6d
Jenkins release build 1.6.1
2022-12-23 11:31:45 +01:00
Michael Zanetti
5b7ac09236
Rework the reachable refreshing
...
This decouples the cyclic refreshing of reachability from the
manual reading of the LQI tables:
Changes the reachable refresh to only poll once a minute, cycling
devices that need polling. Also checking for reachable will now
only read the LQI table. Also removes the coordinator node from
the cyclic checks.
In case a manual refresh is triggered, both LQI and RTG tables
will be read of all non-sleepy nodes, including the coordinator
and without any delays in between polls.
2022-12-18 22:52:17 +01:00
jenkins
782a96bb2f
Jenkins release build 1.6.0
2022-12-10 14:52:21 +01:00
jenkins
0639a35750
Merge PR #78 : Electrical measurement: Fix data parsing
2022-12-10 14:52:21 +01:00
jenkins
d8598e18b2
Merge PR #75 : Fix an occational crash in the deconz backend
2022-12-10 14:52:19 +01:00
jenkins
def973fc58
Merge PR #74 : Expose raw dataIndications and allow sending raw commands on ZigbeeCluster
2022-12-10 14:52:18 +01:00
Michael Zanetti
684e0dc53d
Electrical measurement: Fix data parsing
...
Read individual entries instead of a whole list from the input stream
2022-12-02 11:29:34 +01:00
Michael Zanetti
303caf04e7
Fix a typo in ClusterIdOnOffConfiguration
2022-11-28 23:45:45 +01:00
Michael Zanetti
b797b883e5
Fix an occational crash in the deconz backend
...
May happen if the queue runs full and controller requests time out
2022-11-19 00:36:05 +01:00
jenkins
295418c92f
Jenkins release build 1.5.1
2022-11-07 16:24:59 +01:00
Michael Zanetti
75d286b29a
Expose raw dataIndications and allow sending raw commands on ZigbeeCluster
2022-11-04 18:25:05 +01:00
jenkins
cdc60ad00f
Jenkins release build 1.5.0
2022-10-17 11:20:06 +02:00
jenkins
d18b0a1be9
Merge PR #73 : Fix parsing of floating point data types
2022-10-17 11:20:05 +02:00
jenkins
16b9ea03eb
Merge PR #72 : Register the OTA server cluster on the TI backend
2022-10-17 11:20:04 +02:00
jenkins
705bf28cc3
Merge PR #71 : Silence a warning about unhandled callbacks
2022-10-17 11:20:02 +02:00
jenkins
4ea83aa44c
Merge PR #70 : Update all debug operators and make use of state saver
2022-10-17 11:20:00 +02:00
jenkins
761877fea2
Merge PR #68 : Add Fan Control cluster implementation
2022-10-17 11:19:59 +02:00
jenkins
6200856678
Merge PR #67 : Deconz: Fixes for command queuing
2022-10-17 11:19:57 +02:00
jenkins
b427648eb0
Merge PR #66 : Implement timeout settings for occupancy sensing cluster
2022-10-17 11:19:56 +02:00
jenkins
bbbbbbc521
Merge PR #65 : Complete the OTA cluster implementation
2022-10-17 11:19:55 +02:00
Michael Zanetti
5bc57b89c7
Fix parsing of floating point data types
2022-10-17 00:50:52 +02:00
Michael Zanetti
7ebe593379
Register the OTA server cluster on the TI backend
...
This is required by some devices (at least Tradfri) in order to
query us for images.
2022-10-15 01:28:43 +02:00
Michael Zanetti
9f96e2cc2c
Handle controller busy states properly
2022-10-15 01:22:54 +02:00
Michael Zanetti
f0c7172755
Silence a warning about unhandled callbacks
...
The firmware provides parsed messages for those responses but
we don't use them as nymea-zigbee parses this on its own.
2022-10-14 22:40:35 +02:00
Simon Stürz
2aa22ee262
Update all debug operators and make use of state saver
2022-10-13 12:48:43 +02:00
Michael Zanetti
33d3ad10e9
Add API to interact with bindings
2022-10-13 10:11:11 +02:00
Michael Zanetti
acfd73c271
Obtain LQI neighbor and routing tables from the network
2022-10-13 10:10:57 +02:00
Michael Zanetti
ac7972df35
Complete the OTA cluster implementation
2022-10-12 12:17:30 +02:00
Michael Zanetti
4141de2200
Implement timeout settings for occupancy sensing cluster
2022-10-12 12:16:53 +02:00
Michael Zanetti
e16e04d79e
queue requests that are sent before the stack is ready
2022-10-12 12:16:10 +02:00
Michael Zanetti
f2511a9b25
Add Fan Control cluster implementation
2022-10-12 12:15:25 +02:00
jenkins
a70afb965d
Jenkins release build 1.4.1
2022-09-23 16:33:18 +02:00
jenkins
32316dd43c
Merge PR #63 : Fix permit joining in deconz backend
2022-09-23 16:33:18 +02:00
Michael Zanetti
23f53f38ee
Fix permit joining in deconz backend
...
The router broadcast address 0xFFFC is not a group addres, but a
"regular" address. Setting the destinationAddressMode to GroupAddress
caused the message to not be broadcastet and permit joining was only
enabled on the coordinator.
This caused mainly the issue that joining a network would not work
if the coordinator is out of reach.
In addition to that, there are quite a bit of end devices out there
which behave badly in finding new parents and will stick to the node
they joined in the first place forever, causing them to have bad
signal if further away from the coordinator, even though there
would be routers with much better LQI.
Additionally it fixes a permit joining issue in the TI backend which would
prevent a call to setPermitJoining(0) to explicitly allow joining
only on the coordinator.
The change of radius from 10 to 30 probably isn't needed for 99% of the
networks, however, it may still help for that one percent that does
indeed have a network depth of > 10. Looking at other implementations
out there, 30 seems to be the common sense.
2022-09-10 20:12:17 +02:00
Michael Zanetti
ea73d28213
Fix node type parsing
...
Parsing of NodeTypeEndDevice and NodeTypeRouter were swapped.
2022-08-30 22:48:19 +02:00
jenkins
2707836543
Jenkins release build 1.4.0
2022-08-19 15:41:04 +02:00
jenkins
b9ff17ace8
Merge PR #59 : NXP backend: Fix release file parsing and allow multiple release files as list
2022-08-19 15:41:04 +02:00
jenkins
364b6c6f18
Merge PR #58 : Implement Electricalmeasurement server command handling
2022-08-19 15:41:02 +02:00
Simon Stürz
7acb35d11c
Fix release file parsing and allow multiple release files as list
2022-08-09 14:25:45 +02:00
jenkins
2124f1e81b
Jenkins release build 1.3.1
2022-07-11 15:34:40 +02:00
Michael Zanetti
ebf004af01
Implement Electricalmeasurement server command handling
2022-07-04 14:08:44 +02:00
jenkins
7e436c85e4
Jenkins release build 1.3.0
2022-06-30 15:04:00 +02:00
jenkins
a5d49d7b64
Merge PR #57 : Implement commands for metering cluster
2022-06-30 15:04:00 +02:00
jenkins
50e329b1ce
Merge PR #56 : Add Time cluster implementation
2022-06-30 15:03:58 +02:00
