# Keba

<!-- BEGIN GENERATED: __badges_keba__ -->
<span class="badge testing">TESTING</span> <span class="badge origin-etm">ETM</span> <span class="badge consumer">CONSUMER</span>

<!-- END GENERATED -->

Bornes de recharge Keba (séries P30, P31), communication **Modbus TCP** via réseau local.

## 1. Matériel requis

- Borne Keba P30 ou P31
- Connexion Ethernet vers le réseau du hub

## 2. Activation Modbus TCP

Modbus TCP est **désactivé par défaut** sur les bornes Keba.
Activez-le dans l'interface web de la borne (port `502`).

!!! warning "Activation Modbus"
    Sans cette étape, la borne ne répondra pas à PowerSync.

## 3. Ajout dans PowerSync

Ajout par **découverte automatique** sur le réseau, ou **manuel** (IP, port 502).
Voir [Ajouter un appareil](../../installation/application.md).

## 4. Vérification

`connected`, `pluggedIn` puis `charging` reflètent l'état de la session.

---

## Référence

<!-- BEGIN GENERATED: integrationpluginkeba.json -->
**Manufacturer:** Keba  
**Plugin:** `Keba`

#### Supported models
| Model | Role | Transport | Pairing | Quantities |
| --- | --- | --- | --- | --- |
| **Keba KeContact** | EV charger, Consumption meter | Modbus TCP | Auto-discovery / Manual | 31 |
| **KeConnect German Edition** | EV charger | Modbus TCP | Auto-discovery / Manual | 19 |

#### Per-model detail
??? abstract "Keba KeContact — `keba`"
    _Settings:_

    | Key | Label | Type | Range | Default | Read-only |
    | --- | --- | --- | --- | --- | --- |
    | `macAddress` | MAC address | QString | — | — | yes |
    | `hostName` | Host name | QString | — | — | no |
    | `address` | IP address | QString | — | — | no |
    | `serialNumber` | Serial number | QString | — | — | yes |
    | `model` | Product name | QString | — | — | yes |

    _Measured quantities:_

    | Key | Quantity | Type | Unit |
    | --- | --- | --- | --- |
    | `connected` | Connected | bool | — |
    | `power` | Charging enabled | bool | — |
    | `systemEnabled` | System enabled | bool | — |
    | `phaseCount` | Number of connected phases | uint | — |
    | `activity` | Activity | QString | — |
    | `plugState` | Plug state | QString | — |
    | `pluggedIn` | Car plugged in | bool | — |
    | `charging` | Charging | bool | — |
    | `maxChargingCurrent` | Maximal charging current | double | Ampere |
    | `maxChargingCurrentPercent` | Maximal charging current in percent | uint | Percentage |
    | `maxChargingCurrentHardware` | Maximal hardware charging current | uint | Ampere |
    | `voltagePhaseA` | Voltage phase A | int | Volt |
    | `voltagePhaseB` | Voltage phase B | int | Volt |
    | `voltagePhaseC` | Voltage phase C | int | Volt |
    | `currentPhaseA` | Current phase A | double | Ampere |
    | `currentPhaseB` | Current phase B | double | Ampere |
    | `currentPhaseC` | Current phase C | double | Ampere |
    | `currentPower` | Power consumption | double | Watt |
    | `powerFactor` | Power factor | double | Percentage |
    | `sessionId` | Session ID | uint | — |
    | `sessionTime` | Session time | int | Minutes |
    | `sessionEnergy` | Session energy | double | KiloWattHour |
    | `totalEnergyConsumed` | Total energy consumed | double | KiloWattHour |
    | `outputX2` | Output X2 | bool | — |
    | `input` | Input | bool | — |
    | `uptime` | Uptime | int | Minutes |
    | `error1` | Error 1 | int | — |
    | `error2` | Error 2 | int | — |
    | `failsafeMode` | Failsafe mode | bool | — |
    | `firmware` | Firmware | QString | — |
    | `hostAddress` | Host address | QString | — |

??? abstract "KeConnect German Edition — `kebaSimple`"
    _Settings:_

    | Key | Label | Type | Range | Default | Read-only |
    | --- | --- | --- | --- | --- | --- |
    | `macAddress` | MAC address | QString | — | — | yes |
    | `hostName` | Host name | QString | — | — | no |
    | `address` | IP address | QString | — | — | no |
    | `serialNumber` | Serial number | QString | — | — | yes |
    | `model` | Product name | QString | — | — | yes |

    _Measured quantities:_

    | Key | Quantity | Type | Unit |
    | --- | --- | --- | --- |
    | `connected` | Connected | bool | — |
    | `power` | Charging enabled | bool | — |
    | `systemEnabled` | System enabled | bool | — |
    | `phaseCount` | Number of connected phases | uint | — |
    | `activity` | Activity | QString | — |
    | `plugState` | Plug state | QString | — |
    | `pluggedIn` | Car plugged in | bool | — |
    | `charging` | Charging | bool | — |
    | `maxChargingCurrent` | Maximal charging current | double | Ampere |
    | `maxChargingCurrentPercent` | Maximal charging current in percent | uint | Percentage |
    | `maxChargingCurrentHardware` | Maximal hardware charging current | uint | Ampere |
    | `outputX2` | Output X2 | bool | — |
    | `input` | Input | bool | — |
    | `uptime` | Uptime | int | Minutes |
    | `error1` | Error 1 | int | — |
    | `error2` | Error 2 | int | — |
    | `failsafeMode` | Failsafe mode | bool | — |
    | `firmware` | Firmware | QString | — |
    | `hostAddress` | Host address | QString | — |

<!-- END GENERATED -->