# Keba

<!-- BEGIN GENERATED: __badges_keba__ -->
<span class="badge testing">TESTING</span> <span class="badge origin-etm">ETM</span> <span class="badge consumer">CONSUMER</span>

<!-- END GENERATED -->

Keba-Ladestationen (Reihen P30, P31), Kommunikation über **Modbus TCP** im
lokalen Netz.

## 1. Benötigte Hardware

- Eine Keba P30 oder P31
- Ethernet-Verbindung in das Netz des Hubs

## 2. Modbus TCP freischalten

Modbus TCP ist auf Keba-Ladestationen **werkseitig deaktiviert**.
Schalten Sie es in der Weboberfläche der Station frei (Port `502`).

!!! warning "Modbus-Freischaltung"
    Ohne diesen Schritt antwortet die Station PowerSync nicht.

## 3. Hinzufügen in PowerSync

Hinzufügen per **automatischer Erkennung** im Netz oder **manuell**
(IP-Adresse, Port 502). Siehe
[Gerät hinzufügen](../../installation/application.md).

## 4. Prüfung

`connected`, `pluggedIn` und dann `charging` spiegeln den Zustand des
Ladevorgangs.

---

## Referenz

<!-- BEGIN GENERATED: integrationpluginkeba.json -->
**Manufacturer:** Keba  
**Plugin:** `Keba`

#### Supported models
| Model | Role | Transport | Pairing | Quantities |
| --- | --- | --- | --- | --- |
| **Keba KeContact** | EV charger, Consumption meter | Modbus TCP | Auto-discovery / Manual | 31 |
| **KeConnect German Edition** | EV charger | Modbus TCP | Auto-discovery / Manual | 19 |

#### Per-model detail
??? abstract "Keba KeContact — `keba`"
    _Settings:_

    | Key | Label | Type | Range | Default | Read-only |
    | --- | --- | --- | --- | --- | --- |
    | `macAddress` | MAC address | QString | — | — | yes |
    | `hostName` | Host name | QString | — | — | no |
    | `address` | IP address | QString | — | — | no |
    | `serialNumber` | Serial number | QString | — | — | yes |
    | `model` | Product name | QString | — | — | yes |

    _Measured quantities:_

    | Key | Quantity | Type | Unit |
    | --- | --- | --- | --- |
    | `connected` | Connected | bool | — |
    | `power` | Charging enabled | bool | — |
    | `systemEnabled` | System enabled | bool | — |
    | `phaseCount` | Number of connected phases | uint | — |
    | `activity` | Activity | QString | — |
    | `plugState` | Plug state | QString | — |
    | `pluggedIn` | Car plugged in | bool | — |
    | `charging` | Charging | bool | — |
    | `maxChargingCurrent` | Maximal charging current | double | Ampere |
    | `maxChargingCurrentPercent` | Maximal charging current in percent | uint | Percentage |
    | `maxChargingCurrentHardware` | Maximal hardware charging current | uint | Ampere |
    | `voltagePhaseA` | Voltage phase A | int | Volt |
    | `voltagePhaseB` | Voltage phase B | int | Volt |
    | `voltagePhaseC` | Voltage phase C | int | Volt |
    | `currentPhaseA` | Current phase A | double | Ampere |
    | `currentPhaseB` | Current phase B | double | Ampere |
    | `currentPhaseC` | Current phase C | double | Ampere |
    | `currentPower` | Power consumption | double | Watt |
    | `powerFactor` | Power factor | double | Percentage |
    | `sessionId` | Session ID | uint | — |
    | `sessionTime` | Session time | int | Minutes |
    | `sessionEnergy` | Session energy | double | KiloWattHour |
    | `totalEnergyConsumed` | Total energy consumed | double | KiloWattHour |
    | `outputX2` | Output X2 | bool | — |
    | `input` | Input | bool | — |
    | `uptime` | Uptime | int | Minutes |
    | `error1` | Error 1 | int | — |
    | `error2` | Error 2 | int | — |
    | `failsafeMode` | Failsafe mode | bool | — |
    | `firmware` | Firmware | QString | — |
    | `hostAddress` | Host address | QString | — |

??? abstract "KeConnect German Edition — `kebaSimple`"
    _Settings:_

    | Key | Label | Type | Range | Default | Read-only |
    | --- | --- | --- | --- | --- | --- |
    | `macAddress` | MAC address | QString | — | — | yes |
    | `hostName` | Host name | QString | — | — | no |
    | `address` | IP address | QString | — | — | no |
    | `serialNumber` | Serial number | QString | — | — | yes |
    | `model` | Product name | QString | — | — | yes |

    _Measured quantities:_

    | Key | Quantity | Type | Unit |
    | --- | --- | --- | --- |
    | `connected` | Connected | bool | — |
    | `power` | Charging enabled | bool | — |
    | `systemEnabled` | System enabled | bool | — |
    | `phaseCount` | Number of connected phases | uint | — |
    | `activity` | Activity | QString | — |
    | `plugState` | Plug state | QString | — |
    | `pluggedIn` | Car plugged in | bool | — |
    | `charging` | Charging | bool | — |
    | `maxChargingCurrent` | Maximal charging current | double | Ampere |
    | `maxChargingCurrentPercent` | Maximal charging current in percent | uint | Percentage |
    | `maxChargingCurrentHardware` | Maximal hardware charging current | uint | Ampere |
    | `outputX2` | Output X2 | bool | — |
    | `input` | Input | bool | — |
    | `uptime` | Uptime | int | Minutes |
    | `error1` | Error 1 | int | — |
    | `error2` | Error 2 | int | — |
    | `failsafeMode` | Failsafe mode | bool | — |
    | `firmware` | Firmware | QString | — |
    | `hostAddress` | Host address | QString | — |

<!-- END GENERATED -->