diff --git a/nymea-app/translations/nymea-app-de.ts b/nymea-app/translations/nymea-app-de.ts
index 4012b130..f4a2a1d1 100644
--- a/nymea-app/translations/nymea-app-de.ts
+++ b/nymea-app/translations/nymea-app-de.ts
@@ -6281,6 +6281,14 @@ Möchtest Du fortfahren?
Configure how applications can connect to this systemVerwalte wie sich Anwendungen zu diesem System verbinden können
+
+ Z-Wave
+ Z-Wave
+
+
+ Configure Z-Wave networks
+ Z-Wave Netzwerke einrichten
+ SetupWizard
@@ -7250,6 +7258,376 @@ Bitte benutze diese Funktion nur wenn Du sicher bist, dass es das ist was Du mö
Aktion hinzufügen
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+ Z-Wave Netzwerk hinzufügen
+
+
+ The selected adapter is already in use.
+ Der ausgewählte Adapter ist bereits in Benutzung.
+
+
+ An error happened in the ZWave backend.
+ Im Z-Wave Backend ist ein Fehler aufgetreten.
+
+
+ Available serial ports
+ Verfügbare serielle Schnittstellen
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+ Bitte überprüfe ob der Z-Wave Adapter ordnungsgemäß an einer seriellen Schnittstelle verbunden ist und wähle die entsprechende Schnittstelle aus.
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+ Z-Wave Netzwerk
+
+
+ Help
+ Hilfe
+
+
+ Network settings
+ Netzwerkeinstellungen
+
+
+ Un unexpected error happened in the Z-Wave backend.
+ Im Z-Wave Backend ist ein unerwarteter Fehler aufgetreten.
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+ Die Operation konnte nicht gestartet werden weil das Z-Wave Netzwerk gerade beschäftigt ist. Bitte versuche es später wieder.
+
+
+ An unexpected error happened. Status code: %1
+ Ein unerwarteter Fehler ist aufgetreten. Status-Code: %1
+
+
+ Include Z-Wave device
+ Z-Wave Gerät hinzufügen
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+ Das Z-Wave Netzwerk akzeptiert jetzt neue Geräte. Bitte starte die Verbindungs-Prozedur am Z-Wave Gerät welches in das Netzwerk eingebunden werden soll. Weitere Information findest Du im Handbuch des Gerätes.
+
+
+ Exclude Z-Wave device
+ Z-Wave Gerät entfernen
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+ Z-Wave Geräte können jetzt vom Netzwerk abgemeldet werden. Bitte start die Verbindungsprozedur am Z-Wave Gerät welches aus dem Netzwerk entfernt werden soll. Weitere Informationen findest Du im Handbuch der Geräts.
+
+
+ Network
+ Netzwerk
+
+
+ Network state:
+ Netzwerkstatus:
+
+
+ Online
+ Online
+
+
+ Offline
+ Offline
+
+
+ Starting
+ Wird gestartet
+
+
+ Error
+ Fehler
+
+
+ Device management
+ Geräteverwaltung
+
+
+ Add a new device
+ Gerät hinzufügen
+
+
+ Remove a device
+ Gerät entfernen
+
+
+ Connected devices
+ Verbundene Geräte
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+ Es sind noch keine Z-Wave Geräte verbunden. Öffne das Netzwerk für neue Geräte und starte die Verbindungsprozedur am Z-Wave Gerät. Weitere Information findest Du im Handbuch des jeweiligen Gerätes.
+
+
+ Initializing...
+ Initialisiere...
+
+
+ %1 things
+ %1 Geräte
+
+
+ Network controller
+ Netzwerk-Controller
+
+
+ Unrecognized device
+ Unerkanntes Gerät
+
+
+ Node ID:
+ Node ID:
+
+
+ Device type:
+ Gerätetyp:
+
+
+ Node type:
+ Node-Typ:
+
+
+ Role:
+ Rolle:
+
+
+ Z-Wave plus:
+ Z-Wave Plus:
+
+
+ Yes
+ Ja
+
+
+ No
+ Nein
+
+
+ Security supported:
+ Sichere Verbindung:
+
+
+ Beaming supported:
+ Beaming unterstützt:
+
+
+ Signal strength:
+ Signalstärke:
+
+
+ Version:
+ Version:
+
+
+ Associated things
+ Verknüpfte Geräte
+
+
+ Remove
+ Entfernen
+
+
+ OK
+ OK
+
+
+ Remove Z-Wave node
+ Z-Wave Knoten entfernen
+
+
+ Are you sure you want to remove this node from the network?
+ Bist Du sicher, dass dieser Knoten aus dem Netzwerk entfernt werden soll?
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+ Bitte beachte, dass mit diesem Knoten verknüpfte "Things" auch entfernt werden.
+
+
+ ZigBee network help
+ ZigBee Netzwerk Hilfe
+
+
+ ZigBee router
+ ZigBee Router
+
+
+ ZigBee end device
+ ZigBee Endgerät
+
+
+ Sleepy device
+ Schlafendes Gerät
+
+
+ Z-Wave network help
+ Z-Wave Hilfe
+
+
+ Z-Wave router
+ Z-Wave Router
+
+
+ Z-Wave end device
+ Z-Wave Endgerät
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+ Z-Wave Netzwerkeinstellungen
+
+
+ An error happened in the ZWave backend.
+ Im Z-Wave Backend ist ein Fehler aufgetreten.
+
+
+ Network information
+ Netzwerkinformation
+
+
+ Network state
+ Netzwerk-Status
+
+
+ The network is online
+ Das Netzwerk ist online
+
+
+ The network is offline
+ Das Netzwerk ist offline
+
+
+ The network is starting...
+ Das Netzwerk startet...
+
+
+ The network is in an error state.
+ Das Netzwerk ist in einem fehlerhaften Zustand.
+
+
+ Home ID:
+ Home ID:
+
+
+ Controller type
+ Controller Typ
+
+
+ Primary
+ Primär
+
+
+ Secondary
+ Sekundär
+
+
+ Static
+ Statisch
+
+
+ Bridge
+ Bridge
+
+
+ Hardware information
+ Geräteinformationen
+
+
+ Serial port
+ Serielle Schnittstelle
+
+
+ Manage network
+ Netzwerke verwalten
+
+
+ Remove network
+ Netzwerk entfernen
+
+
+ Factory reset controller
+ Adapter zurücksetzen
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+ Z-Wave
+
+
+ Add Z-Wave network
+ Z-Wave Netzwerk hinzufügen
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+ Es sind noch keine Z-Wave Netzwerke eingerichtet. Erstelle ein Z-Wave Netzwerk um Z-Wave zu nutzen.
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+ Z-Wave ist auf diesem System nicht verfügbar da kein Z-Wave Backend installiert ist.
+
+
+ Add network
+ Netzwerk hinzufügen
+
+
+ Z-Wave Plus network
+ Z-Wave Plus Netzwerk
+
+
+ Z-Wave network
+ Z-Wave Netzwerk
+
+
+ Network state:
+ Netzwerkstatus:
+
+
+ Online
+ Online
+
+
+ Offline
+ Offline
+
+
+ Starting
+ Wird gestartet
+
+
+ Error
+ Fehler
+
+
+ Adapter:
+ Adapter:
+
+
+ %n device(s)
+
+ %n Gerät
+ %n Geräte
+
+
+
+ %n device(s) (%1 disconnected)
+
+ %n Gerät (%1 getrennt)
+ %n Geräte (%1 getrennt)
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-en.ts b/nymea-app/translations/nymea-app-en.ts
index f4930686..b7b039fd 100644
--- a/nymea-app/translations/nymea-app-en.ts
+++ b/nymea-app/translations/nymea-app-en.ts
@@ -5945,6 +5945,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -6875,6 +6883,364 @@ Please only use this if you are sure you want this and consider reporting the is
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+
+
+
+ Network settings
+
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+
+
+
+ OK
+
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+
+
+
+ Sleepy device
+
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+
+
+
+ Network state
+
+
+
+ The network is online
+
+
+
+ The network is offline
+
+
+
+ The network is starting...
+
+
+
+ The network is in an error state.
+
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+
+
+
+ Serial port
+
+
+
+ Manage network
+
+
+
+ Remove network
+
+
+
+ Factory reset controller
+
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+ %n device
+ %n devices
+
+
+
+ %n device(s) (%1 disconnected)
+
+ %n device (%1 disconnected)
+ %n devices (%1 disconnected)
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-en_US.ts b/nymea-app/translations/nymea-app-en_US.ts
index f4930686..b7b039fd 100644
--- a/nymea-app/translations/nymea-app-en_US.ts
+++ b/nymea-app/translations/nymea-app-en_US.ts
@@ -5945,6 +5945,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -6875,6 +6883,364 @@ Please only use this if you are sure you want this and consider reporting the is
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+
+
+
+ Network settings
+
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+
+
+
+ OK
+
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+
+
+
+ Sleepy device
+
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+
+
+
+ Network state
+
+
+
+ The network is online
+
+
+
+ The network is offline
+
+
+
+ The network is starting...
+
+
+
+ The network is in an error state.
+
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+
+
+
+ Serial port
+
+
+
+ Manage network
+
+
+
+ Remove network
+
+
+
+ Factory reset controller
+
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+ %n device
+ %n devices
+
+
+
+ %n device(s) (%1 disconnected)
+
+ %n device (%1 disconnected)
+ %n devices (%1 disconnected)
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-it.ts b/nymea-app/translations/nymea-app-it.ts
index 2e1cd683..ca2d4b4a 100644
--- a/nymea-app/translations/nymea-app-it.ts
+++ b/nymea-app/translations/nymea-app-it.ts
@@ -5992,6 +5992,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -6930,6 +6938,364 @@ Please only use this if you are sure you want this and consider reporting the is
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+ Aiuto
+
+
+ Network settings
+
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+
+
+
+ OK
+ Ok
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+
+
+
+ Sleepy device
+
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+
+
+
+ Network state
+
+
+
+ The network is online
+
+
+
+ The network is offline
+
+
+
+ The network is starting...
+
+
+
+ The network is in an error state.
+
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+
+
+
+ Serial port
+
+
+
+ Manage network
+
+
+
+ Remove network
+
+
+
+ Factory reset controller
+
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+
+
+
+
+
+ %n device(s) (%1 disconnected)
+
+
+
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-ko.ts b/nymea-app/translations/nymea-app-ko.ts
index 51c9ff1b..6a920653 100644
--- a/nymea-app/translations/nymea-app-ko.ts
+++ b/nymea-app/translations/nymea-app-ko.ts
@@ -6115,6 +6115,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -7048,6 +7056,362 @@ Please only use this if you are sure you want this and consider reporting the is
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+ 도움
+
+
+ Network settings
+ 네트워크 설정
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+ 제거
+
+
+ OK
+ 확인
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+
+
+
+ Sleepy device
+
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+
+
+
+ Network state
+
+
+
+ The network is online
+
+
+
+ The network is offline
+
+
+
+ The network is starting...
+
+
+
+ The network is in an error state.
+
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+
+
+
+ Serial port
+
+
+
+ Manage network
+
+
+
+ Remove network
+
+
+
+ Factory reset controller
+
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+
+
+
+
+ %n device(s) (%1 disconnected)
+
+
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-nl.ts b/nymea-app/translations/nymea-app-nl.ts
index e3e45787..08ea38e8 100644
--- a/nymea-app/translations/nymea-app-nl.ts
+++ b/nymea-app/translations/nymea-app-nl.ts
@@ -6003,6 +6003,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -6933,6 +6941,364 @@ Please only use this if you are sure you want this and consider reporting the is
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+ Hulp
+
+
+ Network settings
+
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+ Verwijderen
+
+
+ OK
+ OK
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+
+
+
+ Sleepy device
+
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+
+
+
+ Network state
+
+
+
+ The network is online
+
+
+
+ The network is offline
+
+
+
+ The network is starting...
+
+
+
+ The network is in an error state.
+
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+
+
+
+ Serial port
+
+
+
+ Manage network
+
+
+
+ Remove network
+
+
+
+ Factory reset controller
+
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+
+
+
+
+
+ %n device(s) (%1 disconnected)
+
+
+
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-tr.ts b/nymea-app/translations/nymea-app-tr.ts
index 230ae745..93950e05 100644
--- a/nymea-app/translations/nymea-app-tr.ts
+++ b/nymea-app/translations/nymea-app-tr.ts
@@ -6177,6 +6177,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -7128,6 +7136,374 @@ Lütfen bunu istediğinizden eminseniz kullanın ve yayınlanmamış kanalları
Eylem ekle
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+ Seçilen bağdaştırıcı zaten kullanımda.
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+ Kullanılabilir seri bağlantı noktaları
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+ Yardım
+
+
+ Network settings
+ Ağ ayarları
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+ Ağ
+
+
+ Network state:
+ Ağ durumu:
+
+
+ Online
+ Çevrimiçi
+
+
+ Offline
+ Çevrimdışı
+
+
+ Starting
+ Başlangıç
+
+
+ Error
+ Hata
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+
+
+
+ OK
+
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+ Bu düğümü ağdan kaldırmak istediğinizden emin misiniz?
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+ Lütfen bu düğüm bir şeye atanmışsa, sistemden de kaldırılacağını unutmayın.
+
+
+ ZigBee network help
+ ZigBee ağ yardımı
+
+
+ ZigBee router
+ ZigBee yönlendirici
+
+
+ ZigBee end device
+ ZigBee uç cihazı
+
+
+ Sleepy device
+ uykulu cihaz
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+ ağ bilgileri
+
+
+ Network state
+ Ağ durumu
+
+
+ The network is online
+ ağ çevrimiçi
+
+
+ The network is offline
+ ağ çevrimdışı
+
+
+ The network is starting...
+ Ağ başlıyor...
+
+
+ The network is in an error state.
+ Ağ bir hata durumunda.
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+ donanım bilgileri
+
+
+ Serial port
+
+
+
+ Manage network
+ Ağı yönet
+
+
+ Remove network
+ Ağı kaldır
+
+
+ Factory reset controller
+ Fabrika ayarlarına sıfırlama denetleyicisi
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+ Ağ ekle
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+ Ağ durumu:
+
+
+ Online
+ Çevrimiçi
+
+
+ Offline
+ Çevrimdışı
+
+
+ Starting
+ Başlangıç
+
+
+ Error
+ Hata
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+
+
+
+
+ %n device(s) (%1 disconnected)
+
+
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/translations/nymea-app-vi.ts b/nymea-app/translations/nymea-app-vi.ts
index 40e711d8..e3383948 100644
--- a/nymea-app/translations/nymea-app-vi.ts
+++ b/nymea-app/translations/nymea-app-vi.ts
@@ -5928,6 +5928,14 @@ Do you want to proceed?
Configure how applications can connect to this system
+
+ Z-Wave
+
+
+
+ Configure Z-Wave networks
+
+ SetupWizard
@@ -6857,6 +6865,362 @@ Please only use this if you are sure you want this and consider reporting the is
+
+ ZWaveAddNetworkPage
+
+ Add a new Z-Wave network
+
+
+
+ The selected adapter is already in use.
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Available serial ports
+
+
+
+ Please verify that the Z-Wave adapter is properly connected to a serial port and select the appropriate port.
+
+
+
+
+ ZWaveNetworkPage
+
+ Z-Wave network
+
+
+
+ Help
+
+
+
+ Network settings
+
+
+
+ Un unexpected error happened in the Z-Wave backend.
+
+
+
+ The operation could not be started because the Z-Wave network is busy. Please try again later.
+
+
+
+ An unexpected error happened. Status code: %1
+
+
+
+ Include Z-Wave device
+
+
+
+ The Z-Wave network is now accepting new devices for inclusion. Please start the pairing procedure from the Z-Wave device you want to add to the network. Check the device manual for further details.
+
+
+
+ Exclude Z-Wave device
+
+
+
+ The Z-Wave network is now accepting devices for exclusion. Please start the pairing procedure from the Z-Wave device you want to remove from the network. Check the device manual for further details.
+
+
+
+ Network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Device management
+
+
+
+ Add a new device
+
+
+
+ Remove a device
+
+
+
+ Connected devices
+
+
+
+ There are no Z-Wave devices connected yet. Open the network for new devices to join and start the pairing procedure from the Z-Wave device. Please refer to the devices manual for more information on how to start the pairing.
+
+
+
+ Initializing...
+
+
+
+ %1 things
+
+
+
+ Network controller
+
+
+
+ Unrecognized device
+
+
+
+ Node ID:
+
+
+
+ Device type:
+
+
+
+ Node type:
+
+
+
+ Role:
+
+
+
+ Z-Wave plus:
+
+
+
+ Yes
+
+
+
+ No
+
+
+
+ Security supported:
+
+
+
+ Beaming supported:
+
+
+
+ Signal strength:
+
+
+
+ Version:
+
+
+
+ Associated things
+
+
+
+ Remove
+
+
+
+ OK
+
+
+
+ Remove Z-Wave node
+
+
+
+ Are you sure you want to remove this node from the network?
+
+
+
+ Please note that if this node has been assigned to a thing, it will also be removed from the system.
+
+
+
+ Sleepy device
+
+
+
+ Z-Wave network help
+
+
+
+ Z-Wave router
+
+
+
+ Z-Wave end device
+
+
+
+
+ ZWaveNetworkSettingsPage
+
+ Z-Wave network settings
+
+
+
+ An error happened in the ZWave backend.
+
+
+
+ Network information
+
+
+
+ Network state
+
+
+
+ The network is online
+
+
+
+ The network is offline
+
+
+
+ The network is starting...
+
+
+
+ The network is in an error state.
+
+
+
+ Home ID:
+
+
+
+ Controller type
+
+
+
+ Primary
+
+
+
+ Secondary
+
+
+
+ Static
+
+
+
+ Bridge
+
+
+
+ Hardware information
+
+
+
+ Serial port
+
+
+
+ Manage network
+
+
+
+ Remove network
+
+
+
+ Factory reset controller
+
+
+
+
+ ZWaveSettingsPage
+
+ Z-Wave
+
+
+
+ Add Z-Wave network
+
+
+
+ There are no Z-Wave networks set up yet. In order to use Z-Wave, create a Z-Wave network.
+
+
+
+ Z-Wave is not available on this system as no Z-Wave backend is installed.
+
+
+
+ Add network
+
+
+
+ Z-Wave Plus network
+
+
+
+ Z-Wave network
+
+
+
+ Network state:
+
+
+
+ Online
+
+
+
+ Offline
+
+
+
+ Starting
+
+
+
+ Error
+
+
+
+ Adapter:
+
+
+
+ %n device(s)
+
+
+
+
+
+ %n device(s) (%1 disconnected)
+
+
+
+
+ZigbeeAddNetworkPage
diff --git a/nymea-app/ui/system/zwave/ZWaveNetworkPage.qml b/nymea-app/ui/system/zwave/ZWaveNetworkPage.qml
index d740dfff..a04fc361 100644
--- a/nymea-app/ui/system/zwave/ZWaveNetworkPage.qml
+++ b/nymea-app/ui/system/zwave/ZWaveNetworkPage.qml
@@ -564,7 +564,7 @@ SettingsPageBase {
MeaDialog {
id: dialog
- title: qsTr("ZigBee network help")
+ title: qsTr("Z-Wave network help")
RowLayout {
spacing: Style.margins
@@ -575,7 +575,7 @@ SettingsPageBase {
}
Label {
- text: qsTr("ZigBee router")
+ text: qsTr("Z-Wave router")
}
}
@@ -588,7 +588,7 @@ SettingsPageBase {
}
Label {
- text: qsTr("ZigBee end device")
+ text: qsTr("Z-Wave end device")
}
}