9ceee2b047
|
||
|---|---|---|
| .. | ||
| translations | ||
| README.md | ||
| integrationpluginzigbeelumi.cpp | ||
| integrationpluginzigbeelumi.h | ||
| integrationpluginzigbeelumi.json | ||
| meta.json | ||
| zigbee.svg | ||
| zigbeelumi.pro | ||
README.md
ZigBee Aqara / Xiaomi Mi / Lumi
This plugin allows to interact with ZigBee from Aqara / Xiaomi Mi / Lumi using a native ZigBee network controller in nymea.
Supported Things
In order to bring a ZigBee device into the nymea ZigBee network, the network needs to be opened for joining before you perform the device pairing instructions. The joining process can take up to 30 seconds. If the device does not show up, please restart the pairing process.
Note: if you you already added one of the following devices and you restart the pairing process while the network is closed, the device will leave the ZigBee network and the thing will be removed automatically.
Aqara smart plug
The Aqara smart plug can be switched on and off. The power consumtion is not suppoted yet, but planed for the future.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara weather sensor
The Aqara weather sensor is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara door and window sensor
The Aqara door and window sensor is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara motion sensor
The Aqara motion sensor is fully supported. The duration for the present state can be configured in the thing settings.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara water leak sensor
The Aqara water leak sensor is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara vibration sensor
The Aqara vibration sensor is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara mini switch
The Aqara mini switch is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara wall switch (Double key)
The Aqara wall switch (Double key) is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Aqara single switch Module T1
The Aqara single switch module T1 is fully supported.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button until the LED starts blinking.
Xiaomi Mi temperature humidity sensor
The Aqara single switch module T1 is fully supported.
Note: it takes about 30 seconds until the sensor shows up because the initilization takes longer than normal.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button with a needle until the LED starts blinking.
Xiaomi Mi wireless switch
The Xiaomi Mi wireless switch supports currently only the single button press. The multi click events will be implemented in the future.
Note: it takes about 30 seconds until the sensor shows up because the initilization takes longer than normal.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button with a needle until the LED starts blinking.
Xiaomi Mi door and window sensor
The Xiaomi Mi door and window sensor is fully supported.
Note: it takes about 30 seconds until the sensor shows up because the initilization takes longer than normal.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button with a needle until the LED starts blinking.
Xiaomi Mi occupancy sensor
The Xiaomi Mi occupancy sensor is fully supported. The duration for the present state can be configured in the thing settings.
Note: it takes about 30 seconds until the sensor shows up because the initilization takes longer than normal.
Pairing instructions: Open the ZigBee network for joining. Press and hold the pairing button with a needle until the LED starts blinking.
Requirements
- A compatible ZigBee controller and a running ZigBee network in nymea. You can find more information about supported controllers and ZigBee network configurations here.