ETM-Schurig
/
nymea-plugins-modbus
mirror of https://github.com/nymea/nymea-plugins-modbus.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
nymea-plugins-modbus/amperfied
History
Michael Zanetti 5764f8b83c Amperfied: Disable standby for rtu based energy control wallbox 2023-05-10 13:06:17 +02:00
..
translations New plugin: Amperfied 2023-03-06 15:59:31 +01:00
README.md Amperfied/Heidelberg: Smaller fixes in README and max current setting 2023-05-10 13:06:00 +02:00
amperfied-registers.json Amperfied: Disable standby for rtu based energy control wallbox 2023-05-10 13:06:17 +02:00
amperfied.jpg New plugin: Amperfied 2023-03-06 15:59:31 +01:00
amperfied.pro New plugin: Amperfied 2023-03-06 15:59:31 +01:00
connecthomediscovery.cpp New plugin: Amperfied 2023-03-06 15:59:31 +01:00
connecthomediscovery.h New plugin: Amperfied 2023-03-06 15:59:31 +01:00
energycontroldiscovery.cpp New plugin: Amperfied 2023-03-06 15:59:31 +01:00
energycontroldiscovery.h New plugin: Amperfied 2023-03-06 15:59:31 +01:00
heidelberg-amperfied-modbus-protocol.pdf New plugin: Amperfied 2023-03-06 15:59:31 +01:00
integrationpluginamperfied.cpp Amperfied: Disable standby for rtu based energy control wallbox 2023-05-10 13:06:17 +02:00
integrationpluginamperfied.h New plugin: Amperfied 2023-03-06 15:59:31 +01:00
integrationpluginamperfied.json New plugin: Amperfied 2023-03-06 15:59:31 +01:00
meta.json New plugin: Amperfied 2023-03-06 15:59:31 +01:00

README.md

Amperfied - Heidelberg

Connects nymea to a Amperfied/Heidelberg wallboxes. Currently supported models are:

  • Amperfied Energy Control
  • Amperfied connect.home

Requirements

nymea requires the use of a firmware greator or equal version 1.0.7 on the wallbox.

Amperfied Energy Control

The Amperfied Energy Control is a Modbus RTU device. This means it must be connected to the nymea system using an RS485 port. The Modbus RTU must be configured with a baud rate of 19200, even parity, 8 data bits and 1 stop bit. In order to allow nymea to automatically discover the wallbox on the bus, the Modbus slave ID must be in the range of 1 - 20. If a higher slave ID number is required, the manual setup is to be used.

Amperfied connect.home

The Amperfied connect.home is a Modbus TCP device. This means it must be connected to the same network the nymea system is in.