2bb3ff570b
Constaté au banc à 14:41:58 : l'avertissement « has a model 160 but no StCha/StDisCha block » a été émis une fois, au démarrage, sur une machine dont les deux blocs existent et dont le currentPower a ensuite suivi la batterie correctement en charge, en décharge et au repos. Cause. libnymea-sunspec crée les blocs répétés d'un modèle depuis `initFinished`, émis pendant la PREMIÈRE lecture, juste avant `blockUpdated`. Sur ce premier signal les blocs existent mais n'ont jamais été remplis : tous les `IDStr` sont vides, rien ne se classe, et `hasBatteryBlocks()` répond faux. Cette réponse est exacte et hors sujet — la question n'était pas « pas de batterie » mais « pas encore lu ». Ce que le faux positif coûtait. Ce n'est pas du bruit : le README dit à l'exploitation de chercher cette ligne EN PREMIER pour distinguer une batterie cassée d'une batterie non mesurable. Une ligne qui sort à chaque démarrage sain ne distingue plus rien, et le diagnostic que ce lot venait d'installer était mort-né. Les deux questions sont maintenant posées séparément : `blocksAreIdentified()` avant `hasBatteryBlocks()`. Sans identification, on se tait et on attend le tour suivant — `readBlockData()` passe à chaque rafraîchissement de toute façon. Le garde en double au moment du binding disparaît aussi : les deux updaters se gardent eux-mêmes, un seul endroit à tenir à jour plutôt que deux qui peuvent diverger. Deux tests figent la distinction, dont un sur le cas où l'avertissement DOIT sortir — un GEN24 sans batterie, lu, identifié, sans bloc batterie. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Y3gzsuwENJfJtvuNDT3xGn
2431 lines
137 KiB
C++
2431 lines
137 KiB
C++
// SPDX-License-Identifier: GPL-3.0-or-later
|
|
|
|
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
|
|
*
|
|
* Copyright (C) 2013 - 2024, nymea GmbH
|
|
* Copyright (C) 2024 - 2025, chargebyte austria GmbH
|
|
*
|
|
* This file is part of nymea-plugins-modbus.
|
|
*
|
|
* nymea-plugins-modbus is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* nymea-plugins-modbus is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with nymea-plugins-modbus. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
|
|
|
|
#include "integrationpluginsunspec.h"
|
|
#include "plugininfo.h"
|
|
|
|
#include <network/networkdevicediscovery.h>
|
|
|
|
#include <sunspecmodel.h>
|
|
#include <models/sunspecmodelfactory.h>
|
|
#include <models/sunspeccommonmodel.h>
|
|
|
|
// Inverters
|
|
#include <models/sunspecinvertersinglephasemodel.h>
|
|
#include <models/sunspecinvertersinglephasefloatmodel.h>
|
|
#include <models/sunspecinvertersplitphasemodel.h>
|
|
#include <models/sunspecinvertersplitphasefloatmodel.h>
|
|
#include <models/sunspecinverterthreephasemodel.h>
|
|
#include <models/sunspecinverterthreephasefloatmodel.h>
|
|
|
|
// Meters
|
|
#include <models/sunspecmeterthreephasemodel.h>
|
|
#include <models/sunspecmetersinglephasemodel.h>
|
|
#include <models/sunspecmetersinglephasefloatmodel.h>
|
|
#include <models/sunspecmetersplitsinglephaseabnmodel.h>
|
|
#include <models/sunspecmetersplitsinglephasefloatmodel.h>
|
|
#include <models/sunspecmeterthreephasewyeconnectmodel.h>
|
|
#include <models/sunspecmeterthreephasedeltaconnectmodel.h>
|
|
#include <models/sunspecdeltaconnectthreephaseabcmetermodel.h>
|
|
|
|
#include <models/sunspecstoragemodel.h>
|
|
|
|
#include "sunspecdiscovery.h"
|
|
#include "solaredgebattery.h"
|
|
|
|
#include <QHostAddress>
|
|
|
|
/* How long the orphan sweep waits for a connection that has not reported yet
|
|
* before going ahead without it.
|
|
*
|
|
* INFERRED, no measurement backs this value: see D-2 in DIVERGENCES.md. It is
|
|
* deliberately generous, because the two failure modes are not comparable.
|
|
* Sweeping too late leaves a stale child thing showing as disconnected;
|
|
* sweeping too early deletes a thing of the user. */
|
|
static const int OrphanSweepGraceSeconds = 600;
|
|
|
|
IntegrationPluginSunSpec::IntegrationPluginSunSpec()
|
|
{
|
|
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::init()
|
|
{
|
|
// SunSpec connection params
|
|
m_connectionDiscoverySlaveIdParamTypeIds.insert(sunspecConnectionThingClassId, sunspecConnectionDiscoverySlaveIdParamTypeId);
|
|
m_connectionDiscoverySlaveIdParamTypeIds.insert(solarEdgeConnectionThingClassId, solarEdgeConnectionDiscoverySlaveIdParamTypeId);
|
|
m_connectionDiscoverySlaveIdParamTypeIds.insert(froniusConnectionThingClassId, froniusConnectionDiscoverySlaveIdParamTypeId);
|
|
|
|
m_connectionMacAddressParamTypeIds.insert(sunspecConnectionThingClassId, sunspecConnectionThingMacAddressParamTypeId);
|
|
m_connectionMacAddressParamTypeIds.insert(solarEdgeConnectionThingClassId, solarEdgeConnectionThingMacAddressParamTypeId);
|
|
m_connectionMacAddressParamTypeIds.insert(froniusConnectionThingClassId, froniusConnectionThingMacAddressParamTypeId);
|
|
|
|
m_connectionHostNameParamTypeIds.insert(sunspecConnectionThingClassId, sunspecConnectionThingHostNameParamTypeId);
|
|
m_connectionHostNameParamTypeIds.insert(solarEdgeConnectionThingClassId, solarEdgeConnectionThingHostNameParamTypeId);
|
|
m_connectionHostNameParamTypeIds.insert(froniusConnectionThingClassId, froniusConnectionThingHostNameParamTypeId);
|
|
|
|
m_connectionAddressParamTypeIds.insert(sunspecConnectionThingClassId, sunspecConnectionThingAddressParamTypeId);
|
|
m_connectionAddressParamTypeIds.insert(solarEdgeConnectionThingClassId, solarEdgeConnectionThingAddressParamTypeId);
|
|
m_connectionAddressParamTypeIds.insert(froniusConnectionThingClassId, froniusConnectionThingAddressParamTypeId);
|
|
|
|
m_connectionPortParamTypeIds.insert(sunspecConnectionThingClassId, sunspecConnectionThingPortParamTypeId);
|
|
m_connectionPortParamTypeIds.insert(solarEdgeConnectionThingClassId, solarEdgeConnectionThingPortParamTypeId);
|
|
m_connectionPortParamTypeIds.insert(froniusConnectionThingClassId, froniusConnectionThingPortParamTypeId);
|
|
|
|
m_connectionSlaveIdParamTypeIds.insert(sunspecConnectionThingClassId, sunspecConnectionThingSlaveIdParamTypeId);
|
|
m_connectionSlaveIdParamTypeIds.insert(solarEdgeConnectionThingClassId, solarEdgeConnectionThingSlaveIdParamTypeId);
|
|
m_connectionSlaveIdParamTypeIds.insert(froniusConnectionThingClassId, froniusConnectionThingSlaveIdParamTypeId);
|
|
|
|
// Params for sunspec things
|
|
m_modelIdParamTypeIds.insert(sunspecSinglePhaseInverterThingClassId, sunspecSinglePhaseInverterThingModelIdParamTypeId);
|
|
m_modelIdParamTypeIds.insert(sunspecSplitPhaseInverterThingClassId, sunspecSplitPhaseInverterThingModelIdParamTypeId);
|
|
m_modelIdParamTypeIds.insert(sunspecThreePhaseInverterThingClassId, sunspecThreePhaseInverterThingModelIdParamTypeId);
|
|
m_modelIdParamTypeIds.insert(sunspecStorageThingClassId, sunspecStorageThingModelIdParamTypeId);
|
|
m_modelIdParamTypeIds.insert(sunspecSinglePhaseMeterThingClassId, sunspecSinglePhaseMeterThingModelIdParamTypeId);
|
|
m_modelIdParamTypeIds.insert(sunspecSplitPhaseMeterThingClassId, sunspecSplitPhaseMeterThingModelIdParamTypeId);
|
|
m_modelIdParamTypeIds.insert(sunspecThreePhaseMeterThingClassId, sunspecThreePhaseMeterThingModelIdParamTypeId);
|
|
|
|
m_modbusAddressParamTypeIds.insert(solarEdgeBatteryThingClassId, solarEdgeBatteryThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecSinglePhaseInverterThingClassId, sunspecSinglePhaseInverterThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecSplitPhaseInverterThingClassId, sunspecSplitPhaseInverterThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecThreePhaseInverterThingClassId, sunspecThreePhaseInverterThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecStorageThingClassId, sunspecStorageThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecSinglePhaseMeterThingClassId, sunspecSinglePhaseMeterThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecSplitPhaseMeterThingClassId, sunspecSplitPhaseMeterThingModbusAddressParamTypeId);
|
|
m_modbusAddressParamTypeIds.insert(sunspecThreePhaseMeterThingClassId, sunspecThreePhaseMeterThingModbusAddressParamTypeId);
|
|
|
|
m_manufacturerParamTypeIds.insert(solarEdgeBatteryThingClassId, solarEdgeBatteryThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecSinglePhaseInverterThingClassId, sunspecSinglePhaseInverterThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecSplitPhaseInverterThingClassId, sunspecSplitPhaseInverterThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecThreePhaseInverterThingClassId, sunspecThreePhaseInverterThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecStorageThingClassId, sunspecStorageThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecSinglePhaseMeterThingClassId, sunspecSinglePhaseMeterThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecSplitPhaseMeterThingClassId, sunspecSplitPhaseMeterThingManufacturerParamTypeId);
|
|
m_manufacturerParamTypeIds.insert(sunspecThreePhaseMeterThingClassId, sunspecThreePhaseMeterThingManufacturerParamTypeId);
|
|
|
|
m_deviceModelParamTypeIds.insert(solarEdgeBatteryThingClassId, solarEdgeBatteryThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecSinglePhaseInverterThingClassId, sunspecSinglePhaseInverterThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecSplitPhaseInverterThingClassId, sunspecSplitPhaseInverterThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecThreePhaseInverterThingClassId, sunspecThreePhaseInverterThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecStorageThingClassId, sunspecStorageThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecSinglePhaseMeterThingClassId, sunspecSinglePhaseMeterThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecSplitPhaseMeterThingClassId, sunspecSplitPhaseMeterThingDeviceModelParamTypeId);
|
|
m_deviceModelParamTypeIds.insert(sunspecThreePhaseMeterThingClassId, sunspecThreePhaseMeterThingDeviceModelParamTypeId);
|
|
|
|
m_serialNumberParamTypeIds.insert(solarEdgeBatteryThingClassId, solarEdgeBatteryThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecSinglePhaseInverterThingClassId, sunspecSinglePhaseInverterThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecSplitPhaseInverterThingClassId, sunspecSplitPhaseInverterThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecThreePhaseInverterThingClassId, sunspecThreePhaseInverterThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecStorageThingClassId, sunspecStorageThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecSinglePhaseMeterThingClassId, sunspecSinglePhaseMeterThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecSplitPhaseMeterThingClassId, sunspecSplitPhaseMeterThingSerialNumberParamTypeId);
|
|
m_serialNumberParamTypeIds.insert(sunspecThreePhaseMeterThingClassId, sunspecThreePhaseMeterThingSerialNumberParamTypeId);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::discoverThings(ThingDiscoveryInfo *info)
|
|
{
|
|
if (!hardwareManager()->networkDeviceDiscovery()->available()) {
|
|
qCWarning(dcSunSpec()) << "Failed to discover network devices. The network device discovery is not available.";
|
|
info->finish(Thing::ThingErrorHardwareNotAvailable, QT_TR_NOOP("The discovery is not available."));
|
|
return;
|
|
}
|
|
|
|
|
|
SunSpecDataPoint::ByteOrder byteOrder = SunSpecDataPoint::ByteOrderLittleEndian;
|
|
if (info->thingClassId() == solarEdgeConnectionThingClassId)
|
|
byteOrder = SunSpecDataPoint::ByteOrderBigEndian;
|
|
else if (info->thingClassId() == froniusConnectionThingClassId)
|
|
byteOrder = FroniusRules::byteOrder();
|
|
|
|
quint16 discoverySlaveId = info->params().paramValue(m_connectionDiscoverySlaveIdParamTypeIds.value(info->thingClassId())).toUInt();
|
|
|
|
SunSpecDiscovery *discovery = new SunSpecDiscovery(hardwareManager()->networkDeviceDiscovery(), discoverySlaveId, byteOrder, info);
|
|
// Note: we could add here more
|
|
connect(discovery, &SunSpecDiscovery::discoveryFinished, info, [this, info, discovery](){
|
|
foreach (const SunSpecDiscovery::Result &result, discovery->results()) {
|
|
|
|
// Extract the manufacturer: we pick the first manufacturer name of the first common model having a manufacturer name for now
|
|
QString manufacturer;
|
|
if (!result.modelManufacturers.isEmpty())
|
|
manufacturer = result.modelManufacturers.first();
|
|
|
|
qCDebug(dcSunSpec()) << "Found manufacturers on" << result.networkDeviceInfo << result.port;
|
|
qCDebug(dcSunSpec()) << "Manufacturers:" << result.modelManufacturers;
|
|
qCDebug(dcSunSpec()) << "Picking manufacturer for evaluation:" << manufacturer;
|
|
|
|
// Filter for solar edge if we got one here
|
|
if (info->thingClassId() == solarEdgeConnectionThingClassId) {
|
|
if (!hasManufacturer(result.modelManufacturers, "solaredge") && !hasManufacturer(result.modelManufacturers, "solar edge")) {
|
|
// Solar edge...we must have the manufacturer in one common model
|
|
continue;
|
|
} else {
|
|
manufacturer = "SolarEdge";
|
|
}
|
|
} else if (info->thingClassId() == froniusConnectionThingClassId) {
|
|
if (!FroniusRules::matchesManufacturer(result.modelManufacturers)) {
|
|
// Only offer devices that actually announce themselves as Fronius.
|
|
continue;
|
|
}
|
|
manufacturer = "Fronius";
|
|
} else if (info->thingClassId() == sunspecConnectionThingClassId) {
|
|
// There are some issues regarding the sunspec implementation of kostal.
|
|
// Full support of meter, inverter and storage will be provided in the kostal plugin which makes
|
|
// use of the native modbus communication from kostal.
|
|
if (hasManufacturer(result.modelManufacturers, "kostal")) {
|
|
qCWarning(dcSunSpec()) << "Skipping Kostal manufacturer on SunSpec. Please use the native kostal integration plugin in order to add it to the system.";
|
|
continue;
|
|
}
|
|
}
|
|
|
|
QString title;
|
|
if (!manufacturer.isEmpty()) {
|
|
title = manufacturer + " ";
|
|
}
|
|
title.append("SunSpec connection");
|
|
|
|
QString description;
|
|
MacAddressInfo macInfo;
|
|
switch (result.networkDeviceInfo.monitorMode()) {
|
|
case NetworkDeviceInfo::MonitorModeMac:
|
|
macInfo = result.networkDeviceInfo.macAddressInfos().constFirst();
|
|
description = result.networkDeviceInfo.address().toString();
|
|
if (!macInfo.vendorName().isEmpty())
|
|
description += " - " + result.networkDeviceInfo.macAddressInfos().constFirst().vendorName();
|
|
|
|
break;
|
|
case NetworkDeviceInfo::MonitorModeHostName:
|
|
description = result.networkDeviceInfo.hostName();
|
|
break;
|
|
case NetworkDeviceInfo::MonitorModeIp:
|
|
description = "Interface: " + result.networkDeviceInfo.networkInterface().name();
|
|
break;
|
|
}
|
|
|
|
ThingDescriptor descriptor(info->thingClassId(), title, description);
|
|
|
|
ParamList params;
|
|
params << Param(m_connectionMacAddressParamTypeIds.value(info->thingClassId()), result.networkDeviceInfo.thingParamValueMacAddress());
|
|
params << Param(m_connectionHostNameParamTypeIds.value(info->thingClassId()), result.networkDeviceInfo.thingParamValueHostName());
|
|
params << Param(m_connectionAddressParamTypeIds.value(info->thingClassId()), result.networkDeviceInfo.thingParamValueAddress());
|
|
params << Param(m_connectionPortParamTypeIds.value(info->thingClassId()), result.port);
|
|
params << Param(m_connectionSlaveIdParamTypeIds.value(info->thingClassId()), result.slaveId);
|
|
descriptor.setParams(params);
|
|
|
|
// Check if we already have set up this device
|
|
Thing *existingThing = myThings().findByParams(params);
|
|
if (existingThing) {
|
|
qCDebug(dcSunSpec()) << "This thing already exists in the system:" << result.networkDeviceInfo;
|
|
descriptor.setThingId(existingThing->id());
|
|
}
|
|
|
|
info->addThingDescriptor(descriptor);
|
|
}
|
|
|
|
// Discovery done
|
|
info->finish(Thing::ThingErrorNoError);
|
|
});
|
|
|
|
discovery->startDiscovery();
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::setupThing(ThingSetupInfo *info)
|
|
{
|
|
Thing *thing = info->thing();
|
|
qCDebug(dcSunSpec()) << "Setup thing" << thing;
|
|
qCDebug(dcSunSpec()) << thing->params();
|
|
|
|
if (thing->thingClassId() == sunspecConnectionThingClassId ||
|
|
thing->thingClassId() == solarEdgeConnectionThingClassId ||
|
|
thing->thingClassId() == froniusConnectionThingClassId) {
|
|
|
|
// Handle reconfigure
|
|
if (m_sunSpecConnections.contains(thing->id()) || m_meterConnections.contains(thing->id())) {
|
|
qCDebug(dcSunSpec()) << "Reconfiguring existing thing" << thing->name();
|
|
destroyConnections(thing->id());
|
|
|
|
if (m_monitors.contains(thing)) {
|
|
hardwareManager()->networkDeviceDiscovery()->unregisterMonitor(m_monitors.take(thing));
|
|
}
|
|
}
|
|
|
|
// Create the monitor
|
|
NetworkDeviceMonitor *monitor = hardwareManager()->networkDeviceDiscovery()->registerMonitor(thing);
|
|
if (!monitor) {
|
|
qCWarning(dcSunSpec()) << "Unable to register monitor with the given params" << thing->params();
|
|
info->finish(Thing::ThingErrorInvalidParameter, QT_TR_NOOP("Unable to set up the connection with this configuration, please reconfigure the connection."));
|
|
return;
|
|
}
|
|
|
|
m_monitors.insert(thing, monitor);
|
|
|
|
QHostAddress address = monitor->networkDeviceInfo().address();
|
|
if (address.isNull() && info->isInitialSetup()) {
|
|
qCWarning(dcSunSpec()) << "Cannot set up thing. The host address is not known and this is an initial setup";
|
|
hardwareManager()->networkDeviceDiscovery()->unregisterMonitor(m_monitors.take(thing));
|
|
info->finish(Thing::ThingErrorHardwareFailure, QT_TR_NOOP("The host address is not known yet. Trying later again."));
|
|
return;
|
|
}
|
|
|
|
// Clean up in case the setup gets aborted
|
|
connect(info, &ThingSetupInfo::aborted, monitor, [=](){
|
|
if (m_monitors.contains(thing)) {
|
|
qCDebug(dcSunSpec()) << "Unregister monitor because setup has been aborted.";
|
|
hardwareManager()->networkDeviceDiscovery()->unregisterMonitor(m_monitors.take(thing));
|
|
}
|
|
});
|
|
|
|
uint slaveId = thing->paramValue(m_connectionSlaveIdParamTypeIds.value(thing->thingClassId())).toUInt();
|
|
SunSpecConnection *connection = createConnection(info->thing(), slaveId, true);
|
|
connect(info, &ThingSetupInfo::aborted, connection, &SunSpecConnection::deleteLater);
|
|
|
|
/* A Fronius GEN24 answers for its Smart Meter on another unit ID behind
|
|
* the same host and port. The connection is created here so that it is
|
|
* disposed of along with the thing, but stays idle: startMeterConnection()
|
|
* brings it up once the primary connection is done discovering.
|
|
*
|
|
* An absent meter never fails the setup. A GEN24 without a Smart Meter
|
|
* is a legitimate installation, and meterSlaveId has a non zero default
|
|
* the user did not choose. */
|
|
SunSpecConnection *meterConnection = createMeterConnection(info->thing());
|
|
if (meterConnection) {
|
|
/* Unlike the primary connection above, this one takes itself out of
|
|
* its hash on the way out, so that an aborted setup does not leave a
|
|
* dangling pointer behind. See D-4 in DIVERGENCES.md for why the
|
|
* primary path is left as it is. */
|
|
connect(info, &ThingSetupInfo::aborted, meterConnection, [this, thing](){
|
|
if (m_meterConnections.contains(thing->id()))
|
|
m_meterConnections.take(thing->id())->deleteLater();
|
|
});
|
|
}
|
|
|
|
// If this is the first setup, we must connect successfully fo finishing the setup, otherwise we let the monitor do his work
|
|
if (info->isInitialSetup()) {
|
|
|
|
// Only during setup
|
|
connect(connection, &SunSpecConnection::connectedChanged, info, [this, connection, info] (bool connected) {
|
|
if (connected) {
|
|
connect(connection, &SunSpecConnection::discoveryFinished, info, [this, connection, info] (bool success) {
|
|
if (success) {
|
|
qCDebug(dcSunSpec()) << "Discovery finished successfully during setup of" << connection << ". Found SunSpec data on base register" << connection->baseRegister();
|
|
m_sunSpecConnections.insert(info->thing()->id(), connection);
|
|
info->finish(Thing::ThingErrorNoError);
|
|
processDiscoveryResult(info->thing(), connection);
|
|
} else {
|
|
qCWarning(dcSunSpec()) << "Discovery finished with errors during setup of" << connection;
|
|
info->finish(Thing::ThingErrorHardwareFailure, QT_TR_NOOP("The SunSpec discovery finished with errors. Please make sure this is a SunSpec device."));
|
|
connection->deleteLater();
|
|
}
|
|
});
|
|
|
|
// Perform initial discovery, finish if a valid base register has been found
|
|
connection->startDiscovery();
|
|
} else {
|
|
info->finish(Thing::ThingErrorHardwareNotAvailable);
|
|
connection->deleteLater();
|
|
}
|
|
});
|
|
|
|
connect(info, &ThingSetupInfo::aborted, connection, &SunSpecConnection::deleteLater);
|
|
|
|
if (!connection->connectDevice()) {
|
|
qCWarning(dcSunSpec()) << "Error connecting to SunSpec device" << thing;
|
|
info->finish(Thing::ThingErrorHardwareNotAvailable);
|
|
connection->deleteLater();
|
|
return;
|
|
}
|
|
|
|
} else {
|
|
m_sunSpecConnections.insert(thing->id(), connection);
|
|
|
|
// Finish the setup in any case, not the initial setup and the monitor takes care about connecting
|
|
info->finish(Thing::ThingErrorNoError);
|
|
|
|
if (monitor->reachable()) {
|
|
// Thing already reachable...let's continue with the setup
|
|
connection->connectDevice();
|
|
} else {
|
|
// Wait for the monitor to be ready
|
|
qCDebug(dcSunSpec()) << "Waiting for the network monitor to get reachable before continue to set up the connection" << thing->name() << address.toString() << "...";
|
|
}
|
|
}
|
|
|
|
} else if (thing->thingClassId() == sunspecThreePhaseInverterThingClassId ||
|
|
thing->thingClassId() == sunspecSplitPhaseInverterThingClassId ||
|
|
thing->thingClassId() == sunspecSinglePhaseInverterThingClassId ) {
|
|
|
|
Thing *thing = info->thing();
|
|
uint modelId = thing->paramValue(m_modelIdParamTypeIds.value(thing->thingClassId())).toInt();
|
|
int modbusStartRegister = thing->paramValue(m_modbusAddressParamTypeIds.value(thing->thingClassId())).toInt();
|
|
// Get the model from the connections of the parent if already available
|
|
SunSpecModel *model = findModelFor(thing->parentId(), modelId, modbusStartRegister);
|
|
if (model) {
|
|
connect(model, &SunSpecModel::blockUpdated, this, &IntegrationPluginSunSpec::onInverterBlockUpdated);
|
|
m_sunSpecInverters.insert(thing, model);
|
|
qCDebug(dcSunSpec()) << "Model initialized successfully for" << thing;
|
|
}
|
|
info->finish(Thing::ThingErrorNoError);
|
|
} else if (thing->thingClassId() == sunspecThreePhaseMeterThingClassId
|
|
|| thing->thingClassId() == sunspecSplitPhaseMeterThingClassId
|
|
|| thing->thingClassId() == sunspecSinglePhaseMeterThingClassId ) {
|
|
|
|
Thing *thing = info->thing();
|
|
uint modelId = thing->paramValue(m_modelIdParamTypeIds.value(thing->thingClassId())).toInt();
|
|
int modbusStartRegister = thing->paramValue(m_modbusAddressParamTypeIds.value(thing->thingClassId())).toInt();
|
|
/* Searched across every connection of the parent: on a Fronius thing the
|
|
* meter answers on another unit ID than the inverter. */
|
|
SunSpecModel *model = findModelFor(thing->parentId(), modelId, modbusStartRegister);
|
|
if (model) {
|
|
m_sunSpecMeters.insert(thing, model);
|
|
connect(model, &SunSpecModel::blockUpdated, this, &IntegrationPluginSunSpec::onMeterBlockUpdated);
|
|
qCDebug(dcSunSpec()) << "Model initialized successfully for" << thing;
|
|
} else {
|
|
// Note: will be initialized once the connection is available and discovered.
|
|
qCDebug(dcSunSpec()) << "Model not available yet for" << thing;
|
|
}
|
|
|
|
info->finish(Thing::ThingErrorNoError);
|
|
} else if (thing->thingClassId() == sunspecStorageThingClassId) {
|
|
Thing *thing = info->thing();
|
|
uint modelId = thing->paramValue(m_modelIdParamTypeIds.value(thing->thingClassId())).toInt();
|
|
int modbusStartRegister = thing->paramValue(m_modbusAddressParamTypeIds.value(thing->thingClassId())).toInt();
|
|
SunSpecModel *model = findModelFor(thing->parentId(), modelId, modbusStartRegister);
|
|
if (model) {
|
|
m_sunSpecStorages.insert(thing, model);
|
|
connect(model, &SunSpecModel::blockUpdated, this, &IntegrationPluginSunSpec::onStorageBlockUpdated);
|
|
bindStorageCompanionModels(thing, model);
|
|
qCDebug(dcSunSpec()) << "Model initialized successfully for" << thing;
|
|
} else {
|
|
// Note: will be initialized once the connection is available and discovered.
|
|
qCDebug(dcSunSpec()) << "Model not available yet for" << thing;
|
|
}
|
|
|
|
info->finish(Thing::ThingErrorNoError);
|
|
} else if (thing->thingClassId() == solarEdgeBatteryThingClassId) {
|
|
|
|
Thing *parentThing = myThings().findById(thing->parentId());
|
|
if (parentThing->setupStatus() == Thing::ThingSetupStatusComplete) {
|
|
setupSolarEdgeBattery(info);
|
|
} else {
|
|
connect(parentThing, &Thing::setupStatusChanged, info, [this, info] {
|
|
setupSolarEdgeBattery(info);
|
|
});
|
|
}
|
|
} else {
|
|
Q_ASSERT_X(false, "setupThing", QString("Unhandled thingClassId: %1").arg(info->thing()->thingClassId().toString()).toUtf8());
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::postSetupThing(Thing *thing)
|
|
{
|
|
qCDebug(dcSunSpec()) << "Post setup thing" << thing->name();
|
|
|
|
if (thing->thingClassId() == solarEdgeConnectionThingClassId) {
|
|
SunSpecConnection *connection = m_sunSpecConnections.value(thing->id());
|
|
if (connection) {
|
|
searchSolarEdgeBatteries(connection);
|
|
}
|
|
}
|
|
|
|
// Create the refresh timer if not already set up
|
|
if (!m_refreshTimer) {
|
|
qCDebug(dcSunSpec()) << "Starting refresh timer";
|
|
int refreshTime = effectiveUpdateInterval();
|
|
m_refreshTimer = hardwareManager()->pluginTimerManager()->registerTimer(refreshTime);
|
|
connect(m_refreshTimer, &PluginTimer::timeout, this, &IntegrationPluginSunSpec::onRefreshTimer);
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::thingRemoved(Thing *thing)
|
|
{
|
|
qCDebug(dcSunSpec()) << "Thing removed" << thing->name();
|
|
|
|
/* A Fronius thing owns two connections. The chain below is an else if, so
|
|
* without taking both here the meter one would survive its thing, keeping
|
|
* its socket open and its signals pointing at a destroyed Thing. */
|
|
if (m_sunSpecConnections.contains(thing->id()) || m_meterConnections.contains(thing->id())) {
|
|
destroyConnections(thing->id());
|
|
} else if (m_sunSpecThings.contains(thing)) {
|
|
m_sunSpecThings.take(thing)->deleteLater();
|
|
} else if (m_sunSpecInverters.contains(thing)) {
|
|
m_sunSpecInverters.remove(thing);
|
|
} else if (m_sunSpecMeters.contains(thing)) {
|
|
m_sunSpecMeters.remove(thing);
|
|
} else if (m_sunSpecStorages.contains(thing)) {
|
|
m_sunSpecStorages.remove(thing);
|
|
m_storageMpptModels.remove(thing);
|
|
m_storageNameplateModels.remove(thing);
|
|
m_storagesWarnedWithoutPowerSource.remove(thing->id());
|
|
} else {
|
|
Q_ASSERT_X(false, "thingRemoved", QString("Unhandled thingClassId: %1").arg(thing->thingClassId().toString()).toUtf8());
|
|
}
|
|
|
|
if (m_monitors.contains(thing))
|
|
hardwareManager()->networkDeviceDiscovery()->unregisterMonitor(m_monitors.take(thing));
|
|
|
|
if (myThings().isEmpty()) {
|
|
qCDebug(dcSunSpec()) << "Stopping refresh timer";
|
|
hardwareManager()->pluginTimerManager()->unregisterTimer(m_refreshTimer);
|
|
m_refreshTimer = nullptr;
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::executeAction(ThingActionInfo *info)
|
|
{
|
|
Thing *thing = info->thing();
|
|
Action action = info->action();
|
|
|
|
if (thing->thingClassId() == sunspecStorageThingClassId) {
|
|
SunSpecStorageModel *storage = qobject_cast<SunSpecStorageModel *>(m_sunSpecStorages.value(thing));
|
|
if (!storage) {
|
|
qWarning(dcSunSpec()) << "Could not find sunspec model instance for thing" << thing;
|
|
info->finish(Thing::ThingErrorHardwareNotAvailable);
|
|
return;
|
|
}
|
|
|
|
if (!thing->stateValue(sunspecStorageConnectedStateTypeId).toBool()) {
|
|
qWarning(dcSunSpec()) << "Could not execute action for" << thing << "because the SunSpec connection is not connected.";
|
|
info->finish(Thing::ThingErrorHardwareNotAvailable, QT_TR_NOOP("The SunSpec connection is not connected."));
|
|
return;
|
|
}
|
|
|
|
/* Every setpoint goes through a plan rather than a lone write. The plan
|
|
* puts the registers in the order the hardware expects and closes the
|
|
* sequence with the revert timer, so that a setpoint left behind by a
|
|
* stopped HEMS expires instead of holding the battery forever. */
|
|
QVector<SunSpecStorageLogic::Write> setpoints;
|
|
|
|
if (action.actionTypeId() == sunspecStorageGridChargingActionTypeId) {
|
|
bool gridCharging = action.param(sunspecStorageGridChargingActionGridChargingParamTypeId).value().toBool();
|
|
setpoints.append({SunSpecStorageLogic::RegisterChaGriSet,
|
|
gridCharging ? double(SunSpecStorageModel::ChagrisetGrid) : double(SunSpecStorageModel::ChagrisetPv)});
|
|
} else if (action.actionTypeId() == sunspecStorageEnableChargingActionTypeId) {
|
|
SunSpecStorageModel::Storctl_modFlags controlModeFlags = storage->storCtlMod();
|
|
bool enabled = action.param(sunspecStorageEnableChargingActionEnableChargingParamTypeId).value().toBool();
|
|
controlModeFlags.setFlag(SunSpecStorageModel::Storctl_modCharge, enabled);
|
|
setpoints.append({SunSpecStorageLogic::RegisterStorCtlMod, double(int(controlModeFlags))});
|
|
} else if (action.actionTypeId() == sunspecStorageEnableDischargingActionTypeId) {
|
|
SunSpecStorageModel::Storctl_modFlags controlModeFlags = storage->storCtlMod();
|
|
bool enabled = action.param(sunspecStorageEnableDischargingActionEnableDischargingParamTypeId).value().toBool();
|
|
controlModeFlags.setFlag(SunSpecStorageModel::Storctl_modDiScharge, enabled);
|
|
setpoints.append({SunSpecStorageLogic::RegisterStorCtlMod, double(int(controlModeFlags))});
|
|
} else if (action.actionTypeId() == sunspecStorageChargingRateActionTypeId) {
|
|
setpoints.append({SunSpecStorageLogic::RegisterInWRte,
|
|
action.param(sunspecStorageChargingRateActionChargingRateParamTypeId).value().toDouble()});
|
|
} else if (action.actionTypeId() == sunspecStorageDischargingRateActionTypeId) {
|
|
setpoints.append({SunSpecStorageLogic::RegisterOutWRte,
|
|
action.param(sunspecStorageDischargingRateActionDischargingRateParamTypeId).value().toDouble()});
|
|
} else {
|
|
Q_ASSERT_X(false, "executeAction", QString("Unhandled action: %1").arg(action.actionTypeId().toString()).toUtf8());
|
|
info->finish(Thing::ThingErrorActionTypeNotFound);
|
|
return;
|
|
}
|
|
|
|
const uint revertTime = thing->paramValue(sunspecStorageThingRevertTimeParamTypeId).toUInt();
|
|
executeSetpointPlan(info, storage, SunSpecStorageLogic::planSetpoint(setpoints, revertTime));
|
|
|
|
} else {
|
|
Q_ASSERT_X(false, "executeAction", QString("Unhandled thingClassId: %1").arg(info->thing()->thingClassId().toString()).toUtf8());
|
|
}
|
|
}
|
|
|
|
/* The refresh timer is plugin wide, not per connection, so the Fronius polling
|
|
* floor has to be applied to it: as soon as one Fronius connection is
|
|
* configured, the whole plugin stops polling faster than the floor.
|
|
*
|
|
* Going below it can push the inverter offline towards the manufacturer's
|
|
* portal, and recovery then needs an AC+DC power cycle on site. This is a guard
|
|
* in the code on purpose, not a configurable default - including in debug. */
|
|
int IntegrationPluginSunSpec::effectiveUpdateInterval()
|
|
{
|
|
const int configured = configValue(sunSpecPluginUpdateIntervalParamTypeId).toInt();
|
|
|
|
if (myThings().filterByThingClassId(froniusConnectionThingClassId).isEmpty())
|
|
return configured;
|
|
|
|
const int clamped = FroniusRules::clampUpdateInterval(configured);
|
|
if (clamped != configured) {
|
|
qCWarning(dcSunSpec()) << "Update interval of" << configured << "s is below the"
|
|
<< FroniusRules::MinimumUpdateIntervalSeconds
|
|
<< "s floor required while a Fronius connection is configured. Using"
|
|
<< clamped << "s instead.";
|
|
}
|
|
return clamped;
|
|
}
|
|
|
|
bool IntegrationPluginSunSpec::isFroniusChild(const ThingId &parentId)
|
|
{
|
|
Thing *parent = myThings().findById(parentId);
|
|
return parent && parent->thingClassId() == froniusConnectionThingClassId;
|
|
}
|
|
|
|
QModbusReply *IntegrationPluginSunSpec::writeSetpointRegister(SunSpecStorageModel *storage, const SunSpecStorageLogic::Write &write)
|
|
{
|
|
switch (write.reg) {
|
|
case SunSpecStorageLogic::RegisterChaGriSet:
|
|
return storage->setChaGriSet(write.value != 0 ? SunSpecStorageModel::ChagrisetGrid
|
|
: SunSpecStorageModel::ChagrisetPv);
|
|
case SunSpecStorageLogic::RegisterStorCtlMod:
|
|
return storage->setStorCtlMod(SunSpecStorageModel::Storctl_modFlags(int(write.value)));
|
|
case SunSpecStorageLogic::RegisterInWRte:
|
|
return storage->setInWRte(write.value);
|
|
case SunSpecStorageLogic::RegisterOutWRte:
|
|
return storage->setOutWRte(write.value);
|
|
case SunSpecStorageLogic::RegisterRvrtTms:
|
|
return storage->setInOutWRteRvrtTms(static_cast<quint16>(write.value));
|
|
}
|
|
return nullptr;
|
|
}
|
|
|
|
/* The writes are issued one after another rather than all at once: the order is
|
|
* part of the contract with the hardware, and several inverters ask for
|
|
* sequential requests. */
|
|
void IntegrationPluginSunSpec::executeSetpointWrite(ThingActionInfo *info, SunSpecStorageModel *storage, const SunSpecStorageLogic::SetpointPlan &plan, int index)
|
|
{
|
|
if (index >= plan.writes.count()) {
|
|
if (plan.verifyReadback.isEmpty()) {
|
|
info->finish(Thing::ThingErrorNoError);
|
|
return;
|
|
}
|
|
|
|
refreshStorageBlock(info, storage, [this, info, storage, plan]() {
|
|
verifySetpointPlan(info, storage, plan);
|
|
});
|
|
return;
|
|
}
|
|
|
|
const SunSpecStorageLogic::Write write = plan.writes.at(index);
|
|
|
|
/* Defence in depth: a Fronius inverter accepts some writes and then ignores
|
|
* them without raising a Modbus exception, so the failure is invisible.
|
|
* Those registers are refused before anything goes on the wire rather than
|
|
* silently pretending to have worked. */
|
|
if (isFroniusChild(info->thing()->parentId())
|
|
&& FroniusRules::isWriteForbidden(SunSpecStorageLogic::registerName(write.reg))) {
|
|
qCWarning(dcSunSpec()) << "Refusing to write" << SunSpecStorageLogic::registerName(write.reg)
|
|
<< "on" << info->thing()
|
|
<< "- this register is ignored by the inverter without raising an exception.";
|
|
info->finish(Thing::ThingErrorHardwareFailure);
|
|
return;
|
|
}
|
|
|
|
QModbusReply *reply = writeSetpointRegister(storage, write);
|
|
if (!reply) {
|
|
qCWarning(dcSunSpec()) << "Could not write" << SunSpecStorageLogic::registerName(write.reg) << "on" << info->thing();
|
|
info->finish(Thing::ThingErrorHardwareFailure);
|
|
return;
|
|
}
|
|
|
|
connect(reply, &QModbusReply::finished, reply, &QModbusReply::deleteLater);
|
|
connect(reply, &QModbusReply::finished, info, [this, info, storage, plan, index, write, reply] {
|
|
if (reply->error() != QModbusDevice::NoError) {
|
|
qCWarning(dcSunSpec()) << "Error writing" << SunSpecStorageLogic::registerName(write.reg)
|
|
<< "on" << info->thing() << reply->errorString();
|
|
info->finish(Thing::ThingErrorHardwareFailure);
|
|
return;
|
|
}
|
|
|
|
executeSetpointWrite(info, storage, plan, index + 1);
|
|
});
|
|
}
|
|
|
|
double IntegrationPluginSunSpec::readSetpointRegister(SunSpecStorageModel *storage, SunSpecStorageLogic::Register reg)
|
|
{
|
|
switch (reg) {
|
|
case SunSpecStorageLogic::RegisterChaGriSet:
|
|
return storage->chaGriSet();
|
|
case SunSpecStorageLogic::RegisterStorCtlMod:
|
|
return int(storage->storCtlMod());
|
|
case SunSpecStorageLogic::RegisterInWRte:
|
|
return storage->inWRte();
|
|
case SunSpecStorageLogic::RegisterOutWRte:
|
|
return storage->outWRte();
|
|
case SunSpecStorageLogic::RegisterRvrtTms:
|
|
return storage->inOutWRteRvrtTms();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Reads the model block again and calls the continuation once the fresh values
|
|
* are in. The guard timer keeps a lost or unanswered read from stranding the
|
|
* action forever; the continuation then runs on stale values, which is why it
|
|
* warns. */
|
|
void IntegrationPluginSunSpec::refreshStorageBlock(ThingActionInfo *info, SunSpecStorageModel *storage, const std::function<void()> &continuation)
|
|
{
|
|
QObject *context = new QObject(info);
|
|
QSharedPointer<bool> fired = QSharedPointer<bool>::create(false);
|
|
|
|
auto proceed = [context, fired, continuation](bool timedOut) {
|
|
if (*fired)
|
|
return;
|
|
*fired = true;
|
|
if (timedOut)
|
|
qCWarning(dcSunSpec()) << "Timed out waiting for a fresh storage block; continuing on the previous values.";
|
|
context->deleteLater();
|
|
continuation();
|
|
};
|
|
|
|
connect(storage, &SunSpecModel::blockUpdated, context, [proceed]() { proceed(false); });
|
|
|
|
QTimer *guard = new QTimer(context);
|
|
guard->setSingleShot(true);
|
|
guard->setInterval(FroniusRules::DefaultTimeoutMilliSeconds * (FroniusRules::DefaultNumberOfRetries + 1));
|
|
connect(guard, &QTimer::timeout, context, [proceed]() { proceed(true); });
|
|
guard->start();
|
|
|
|
storage->readBlockData();
|
|
}
|
|
|
|
/* Write, read back, compare. An inverter may accept a write and then ignore it
|
|
* without raising a Modbus exception - control not enabled on the device, grid
|
|
* charging not allowed, an IP restriction, or another controller overwriting
|
|
* the setpoints. An unverified setpoint is an unapplied setpoint. */
|
|
void IntegrationPluginSunSpec::verifySetpointPlan(ThingActionInfo *info, SunSpecStorageModel *storage, const SunSpecStorageLogic::SetpointPlan &plan)
|
|
{
|
|
bool healthy = true;
|
|
|
|
foreach (const SunSpecStorageLogic::Write &write, plan.writes) {
|
|
if (!plan.verifyReadback.contains(write.reg))
|
|
continue;
|
|
|
|
const double readBack = readSetpointRegister(storage, write.reg);
|
|
|
|
/* The rates carry a scale factor of -2, so anything within a hundredth
|
|
* is the same value. The enums and the bitfield compare exactly. */
|
|
const double tolerance = SunSpecStorageLogic::isScaledRate(write.reg) ? 0.011 : 0.0001;
|
|
if (qAbs(readBack - write.value) > tolerance) {
|
|
qCWarning(dcSunSpec()) << "Setpoint not applied on" << info->thing() << ":"
|
|
<< SunSpecStorageLogic::registerName(write.reg)
|
|
<< "was written as" << write.value << "but reads back as" << readBack;
|
|
healthy = false;
|
|
}
|
|
}
|
|
|
|
info->thing()->setStateValue(sunspecStorageControlHealthyStateTypeId, healthy);
|
|
info->finish(Thing::ThingErrorNoError);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::executeSetpointPlan(ThingActionInfo *info, SunSpecStorageModel *storage, const SunSpecStorageLogic::SetpointPlan &plan)
|
|
{
|
|
if (!plan.rereadScaleFactor) {
|
|
executeSetpointWrite(info, storage, plan, 0);
|
|
return;
|
|
}
|
|
|
|
/* Scale factors are not guaranteed static: they may change with firmware
|
|
* and at runtime. A factor cached during an earlier poll can put the
|
|
* setpoint an order of magnitude off, so refresh it right before writing. */
|
|
refreshStorageBlock(info, storage, [this, info, storage, plan]() {
|
|
executeSetpointWrite(info, storage, plan, 0);
|
|
});
|
|
}
|
|
|
|
Thing *IntegrationPluginSunSpec::getThingForSunSpecModel(uint modelId, uint modbusAddress, const ThingId &parentId)
|
|
{
|
|
foreach (Thing *thing, myThings()) {
|
|
if (!m_modelIdParamTypeIds.contains(thing->thingClassId()))
|
|
continue;
|
|
|
|
uint thingModelId = thing->paramValue(m_modelIdParamTypeIds.value(thing->thingClassId())).toUInt();
|
|
uint thingModbusAddress = thing->paramValue(m_modbusAddressParamTypeIds.value(thing->thingClassId())).toUInt();
|
|
if (thingModelId == modelId && thingModbusAddress == modbusAddress && thing->parentId() == parentId) {
|
|
return thing;
|
|
}
|
|
}
|
|
|
|
return nullptr;
|
|
}
|
|
|
|
bool IntegrationPluginSunSpec::sunspecThingAlreadyAdded(uint modelId, uint modbusAddress, const ThingId &parentId)
|
|
{
|
|
return getThingForSunSpecModel(modelId, modbusAddress, parentId)!= nullptr;
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::processDiscoveryResult(Thing *thing, SunSpecConnection *connection)
|
|
{
|
|
qCInfo(dcSunSpec()) << "Processing discovery result from" << thing->name() << connection;
|
|
|
|
/* Recorded here rather than in the discoveryFinished handler: the initial
|
|
* setup calls this function from a second handler on the same signal, so
|
|
* doing it there would make the orphan sweep depend on the order Qt happens
|
|
* to invoke the two. */
|
|
m_discoveredConnections.insert(connection);
|
|
|
|
foreach (SunSpecModel *model, connection->models()) {
|
|
Thing *modelThing = getThingForSunSpecModel(model->modelId(), model->modbusStartRegister(), thing->id());
|
|
if (modelThing) {
|
|
|
|
// We already set up a thing for this model. Make sure we are actually monitoring and updating it
|
|
|
|
qCDebug(dcSunSpec()) << "Found" << modelThing << "for" << model;
|
|
|
|
if (modelThing->thingClassId() == sunspecSinglePhaseInverterThingClassId
|
|
|| modelThing->thingClassId() == sunspecSplitPhaseInverterThingClassId
|
|
|| modelThing->thingClassId() == sunspecThreePhaseInverterThingClassId) {
|
|
|
|
if (!m_sunSpecInverters.contains(modelThing)) {
|
|
m_sunSpecInverters.insert(modelThing, model);
|
|
connect(model, &SunSpecModel::blockUpdated, this, &IntegrationPluginSunSpec::onInverterBlockUpdated);
|
|
qCDebug(dcSunSpec()) << "Model initialized successfully for" << modelThing;
|
|
}
|
|
} else if (modelThing->thingClassId() == sunspecSinglePhaseMeterThingClassId
|
|
|| modelThing->thingClassId() == sunspecSplitPhaseMeterThingClassId
|
|
|| modelThing->thingClassId() == sunspecThreePhaseMeterThingClassId) {
|
|
|
|
if (!m_sunSpecMeters.contains(modelThing)) {
|
|
m_sunSpecMeters.insert(modelThing, model);
|
|
connect(model, &SunSpecModel::blockUpdated, this, &IntegrationPluginSunSpec::onMeterBlockUpdated);
|
|
qCDebug(dcSunSpec()) << "Model initialized successfully for" << modelThing;
|
|
}
|
|
} else if (modelThing->thingClassId() == sunspecStorageThingClassId) {
|
|
|
|
if (!m_sunSpecStorages.contains(modelThing)) {
|
|
m_sunSpecStorages.insert(modelThing, model);
|
|
connect(model, &SunSpecModel::blockUpdated, this, &IntegrationPluginSunSpec::onStorageBlockUpdated);
|
|
qCDebug(dcSunSpec()) << "Model initialized successfully for" << modelThing;
|
|
}
|
|
|
|
/* Outside the guard above: a storage thing bound to its model
|
|
* 124 before its connection finished discovering has no
|
|
* companion models yet, and would never get them if this only
|
|
* ran on the cycle that created the binding. */
|
|
bindStorageCompanionModels(modelThing, model);
|
|
}
|
|
} else {
|
|
|
|
// No thing for this model, let's see if we can create one
|
|
|
|
switch (model->modelId()) {
|
|
case SunSpecModelFactory::ModelIdCommon:
|
|
// Skip the common model, we already handled this one for each thing model
|
|
break;
|
|
case SunSpecModelFactory::ModelIdInverterSinglePhase:
|
|
case SunSpecModelFactory::ModelIdInverterSinglePhaseFloat:
|
|
autocreateSunSpecModelThing(sunspecSinglePhaseInverterThingClassId, QT_TR_NOOP("Single Phase Inverter"), thing->id(), model);
|
|
break;
|
|
case SunSpecModelFactory::ModelIdInverterSplitPhase:
|
|
case SunSpecModelFactory::ModelIdInverterSplitPhaseFloat:
|
|
autocreateSunSpecModelThing(sunspecSplitPhaseInverterThingClassId, QT_TR_NOOP("Split Phase Inverter"), thing->id(), model);
|
|
break;
|
|
case SunSpecModelFactory::ModelIdInverterThreePhase:
|
|
case SunSpecModelFactory::ModelIdInverterThreePhaseFloat:
|
|
autocreateSunSpecModelThing(sunspecThreePhaseInverterThingClassId, QT_TR_NOOP("Three Phase Inverter"), thing->id(), model);
|
|
break;
|
|
case SunSpecModelFactory::ModelIdMeterSinglePhase:
|
|
case SunSpecModelFactory::ModelIdMeterSinglePhaseFloat:
|
|
autocreateSunSpecModelThing(sunspecSinglePhaseMeterThingClassId, QT_TR_NOOP("Single Phase Meter"), thing->id(), model);
|
|
break;
|
|
case SunSpecModelFactory::ModelIdMeterSplitSinglePhaseAbn:
|
|
case SunSpecModelFactory::ModelIdMeterSplitSinglePhaseFloat:
|
|
autocreateSunSpecModelThing(sunspecSplitPhaseMeterThingClassId, QT_TR_NOOP("Split Phase Meter"), thing->id(), model);
|
|
break;
|
|
case SunSpecModelFactory::ModelIdMeterThreePhase:
|
|
case SunSpecModelFactory::ModelIdDeltaConnectThreePhaseAbcMeter:
|
|
case SunSpecModelFactory::ModelIdMeterThreePhaseWyeConnect:
|
|
case SunSpecModelFactory::ModelIdMeterThreePhaseDeltaConnect:
|
|
autocreateSunSpecModelThing(sunspecThreePhaseMeterThingClassId, QT_TR_NOOP("Three Phase Meter"), thing->id(), model);
|
|
break;
|
|
case SunSpecModelFactory::ModelIdStorage: {
|
|
/* A hybrid GEN24 publishes model 124 even with no battery
|
|
* wired to it. Creating the child anyway gives the customer a
|
|
* phantom battery stuck on batteryCritical. Only the Fronius
|
|
* path is gated; the generic and solarEdge vendors keep their
|
|
* previous behaviour. */
|
|
/* Asked of the connection thing we already hold, not through
|
|
* isFroniusChild(): during the initial setup the parent is not
|
|
* registered in myThings() yet, so a lookup answers false and
|
|
* the gate would be skipped exactly when it is needed. */
|
|
SunSpecStorageModel *storageModel = qobject_cast<SunSpecStorageModel *>(model);
|
|
if (storageModel && thing->thingClassId() == froniusConnectionThingClassId
|
|
&& !FroniusRules::hasBattery(storageModel->inBatV(), storageModel->storAval())) {
|
|
qCDebug(dcSunSpec()) << "Fronius model 124 found but no battery is installed"
|
|
<< "(InBatV" << storageModel->inBatV()
|
|
<< "StorAval" << storageModel->storAval()
|
|
<< "). Not creating a storage thing.";
|
|
break;
|
|
}
|
|
autocreateSunSpecModelThing(sunspecStorageThingClassId, QT_TR_NOOP("Storage"), thing->id(), model);
|
|
break;
|
|
}
|
|
default:
|
|
qCWarning(dcSunSpec()) << "Plugin has no implementation for detected" << model;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Check if we have a model for all child devices, otherwise we let the device dissappear
|
|
// As of now there might be following situation where this code is required:
|
|
// - A setup has changed and something has been removed or replaced
|
|
// - Some SunSpec device seem to communicate different model id depending on the startup phase
|
|
// i.e. they communicate a SinglePhase Meter on register x, few minutes later it is a 3 phase meter on x
|
|
// This code should handle such weird setups...
|
|
|
|
if (connection->models().isEmpty())
|
|
return;
|
|
|
|
/* With more than one connection under the same parent, one connection only
|
|
* ever sees half of the picture. Sweeping on that half would make the
|
|
* children of the other half disappear on every single discovery. So the
|
|
* sweep waits for every connection of this parent to have reported, and
|
|
* confronts the children with the union of their models. */
|
|
if (!orphanSweepAllowed(thing))
|
|
return;
|
|
|
|
QList<SunSpecModel *> knownModels;
|
|
foreach (SunSpecConnection *parentConnection, connectionsFor(thing->id())) {
|
|
if (m_discoveredConnections.contains(parentConnection))
|
|
knownModels.append(parentConnection->models());
|
|
}
|
|
|
|
foreach (Thing *child, myThings().filterByParentId(thing->id())) {
|
|
if (!m_modelIdParamTypeIds.contains(child->thingClassId()) || !m_modbusAddressParamTypeIds.contains(child->thingClassId()))
|
|
continue;
|
|
|
|
uint childModelId = child->paramValue(m_modelIdParamTypeIds.value(child->thingClassId())).toUInt();
|
|
uint childModbusAddress = child->paramValue(m_modbusAddressParamTypeIds.value(child->thingClassId())).toUInt();
|
|
|
|
bool modelFoundForChild = false;
|
|
foreach (SunSpecModel *model, knownModels) {
|
|
if (childModelId == model->modelId() && childModbusAddress == model->modbusStartRegister()) {
|
|
modelFoundForChild = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!modelFoundForChild) {
|
|
qCInfo(dcSunSpec()) << "The model for" << child << "does not seem to be available any more on" << thing->name() << "Removing the device since it does not seem to exist ony more on this connection.";
|
|
emit autoThingDisappeared(child->id());
|
|
}
|
|
}
|
|
}
|
|
|
|
bool IntegrationPluginSunSpec::orphanSweepAllowed(Thing *thing)
|
|
{
|
|
bool everyConnectionReported = true;
|
|
foreach (SunSpecConnection *connection, connectionsFor(thing->id())) {
|
|
if (!m_discoveredConnections.contains(connection)) {
|
|
everyConnectionReported = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (everyConnectionReported) {
|
|
m_orphanSweepDeadlines.remove(thing->id());
|
|
return true;
|
|
}
|
|
|
|
/* Hold the sweep back, but not forever: a connection whose discovery never
|
|
* returns would otherwise freeze it for good, and a child thing left over
|
|
* from a previous setup would never be cleaned up.
|
|
*
|
|
* The grace period is deliberately generous. The two outcomes are not
|
|
* comparable: sweeping too late leaves a stale thing showing as
|
|
* disconnected, sweeping too early deletes a thing of the user. */
|
|
if (!m_orphanSweepDeadlines.contains(thing->id())) {
|
|
m_orphanSweepDeadlines.insert(thing->id(), QDateTime::currentDateTime().addSecs(OrphanSweepGraceSeconds));
|
|
qCDebug(dcSunSpec()) << "Holding the orphan sweep of" << thing->name()
|
|
<< "back until every connection has reported, or for"
|
|
<< OrphanSweepGraceSeconds << "s at the most.";
|
|
return false;
|
|
}
|
|
|
|
if (QDateTime::currentDateTime() < m_orphanSweepDeadlines.value(thing->id()))
|
|
return false;
|
|
|
|
qCWarning(dcSunSpec()) << "A connection of" << thing->name() << "never finished a discovery within"
|
|
<< OrphanSweepGraceSeconds << "s. Sweeping orphan children against the connections"
|
|
<< "that did report.";
|
|
return true;
|
|
}
|
|
|
|
|
|
/* Creates one SunSpec connection for a thing.
|
|
*
|
|
* A thing has exactly one primary connection, and a Fronius connection may have
|
|
* a second one towards its Smart Meter on another unit ID. Everything the two
|
|
* share - byte order, timeout, retries, rediscovery on reconnect - lives here;
|
|
* everything that belongs to the thing as a whole rather than to one of its
|
|
* connections is guarded by isPrimary. */
|
|
SunSpecConnection *IntegrationPluginSunSpec::createConnection(Thing *thing, uint slaveId, bool isPrimary)
|
|
{
|
|
QHostAddress address = m_monitors.value(thing)->networkDeviceInfo().address();
|
|
int port = thing->paramValue(m_connectionPortParamTypeIds.value(thing->thingClassId())).toInt();
|
|
|
|
QHash<ThingId, SunSpecConnection *> &connections = isPrimary ? m_sunSpecConnections : m_meterConnections;
|
|
if (connections.contains(thing->id())) {
|
|
qCDebug(dcSunSpec()) << "Reconfigure SunSpec connection" << thing << "on slave ID" << slaveId;
|
|
connections.take(thing->id())->deleteLater();
|
|
}
|
|
|
|
SunSpecConnection *connection = nullptr;
|
|
if (thing->thingClassId() == solarEdgeConnectionThingClassId) {
|
|
// Note: for some reason, solar edge is using big endian register order instead
|
|
// of little endian as specified in sunspec and even solar edge documentation
|
|
connection = new SunSpecConnection(address, port, slaveId, SunSpecDataPoint::ByteOrderBigEndian, this);
|
|
} else if (thing->thingClassId() == froniusConnectionThingClassId) {
|
|
// No endianness parameter here: the byte order is imposed, not chosen.
|
|
connection = new SunSpecConnection(address, port, slaveId, FroniusRules::byteOrder(), this);
|
|
} else {
|
|
SunSpecDataPoint::ByteOrder endianness = SunSpecDataPoint::ByteOrderLittleEndian;
|
|
QString endiannessParam = thing->paramValue("endianness").toString();
|
|
if (endiannessParam == "Big Endian")
|
|
endianness = SunSpecDataPoint::ByteOrderBigEndian;
|
|
|
|
connection = new SunSpecConnection(address, port, slaveId, endianness, this);
|
|
}
|
|
|
|
if (thing->thingClassId() == froniusConnectionThingClassId) {
|
|
connection->setTimeout(FroniusRules::DefaultTimeoutMilliSeconds);
|
|
connection->setNumberOfRetries(FroniusRules::DefaultNumberOfRetries);
|
|
} else {
|
|
connection->setTimeout(configValue(sunSpecPluginTimeoutParamTypeId).toUInt());
|
|
connection->setNumberOfRetries(configValue(sunSpecPluginNumberOfRetriesParamTypeId).toUInt());
|
|
}
|
|
|
|
/* Reconnect on monitor reachable changed.
|
|
*
|
|
* Only the primary connection follows the monitor. The meter one is driven
|
|
* by the primary's discovery instead, so that the two never handshake at the
|
|
* same time towards the same inverter. */
|
|
if (isPrimary) {
|
|
NetworkDeviceMonitor *monitor = m_monitors.value(thing);
|
|
connect(monitor, &NetworkDeviceMonitor::reachableChanged, thing, [=](bool reachable){
|
|
qCDebug(dcSunSpec()) << "Network device monitor reachable changed for" << thing->name() << reachable;
|
|
if (!thing->setupComplete())
|
|
return;
|
|
|
|
if (reachable && !thing->stateValue("connected").toBool()) {
|
|
qCDebug(dcSunSpec()) << "The monitor is reachable. Set the host address to" << monitor->networkDeviceInfo().address() << "and start connecting...";
|
|
connection->setHostAddress(monitor->networkDeviceInfo().address());
|
|
connection->connectDevice();
|
|
}
|
|
});
|
|
}
|
|
|
|
connections.insert(thing->id(), connection);
|
|
|
|
// Update all child things connected states for this connection
|
|
connect(connection, &SunSpecConnection::connectedChanged, thing, [this, connection, thing, isPrimary] (bool connected) {
|
|
if (connected) {
|
|
qCDebug(dcSunSpec()) << connection << "connected";
|
|
} else {
|
|
qCWarning(dcSunSpec()) << connection << "disconnected";
|
|
}
|
|
|
|
/* The connected state of the thing follows the primary connection alone.
|
|
* A Smart Meter that drops must not mark the inverter unreachable, nor
|
|
* blank the data it is still delivering. */
|
|
if (isPrimary)
|
|
thing->setStateValue("connected", connected);
|
|
|
|
if (connected) {
|
|
if (thing->setupComplete()) {
|
|
// We rediscovery all models on every connect to keep the child things in sync
|
|
connection->startDiscovery();
|
|
}
|
|
}
|
|
// Update connected state of the child things of this connection
|
|
foreach (Thing *child, childThingsOn(thing, connection)) {
|
|
if (connected) {
|
|
child->setStateValue("connected", true);
|
|
} else {
|
|
markThingStatesDisconnected(child);
|
|
}
|
|
}
|
|
});
|
|
|
|
connect(connection, &SunSpecConnection::discoveryFinished, thing, [this, connection, thing, isPrimary] (bool success) {
|
|
if (success) {
|
|
qCDebug(dcSunSpec()) << "Discovery finished successfully of" << connection;
|
|
processDiscoveryResult(thing, connection);
|
|
} else {
|
|
qCWarning(dcSunSpec()) << "Discovery finished with errors on" << connection;
|
|
}
|
|
|
|
/* Whether it succeeded or not, the primary connection is done talking:
|
|
* this is the quietest moment to bring the Smart Meter one up. Two
|
|
* simultaneous SunSpec discoveries would be the heaviest load this
|
|
* plugin ever puts on an inverter, and the cost of avoiding it is a few
|
|
* seconds of pairing. */
|
|
if (isPrimary)
|
|
startMeterConnection(thing);
|
|
});
|
|
|
|
/* m_discoveredConnections is keyed on the pointer, so it must not outlive
|
|
* it. The entry is only ever compared, never dereferenced. */
|
|
connect(connection, &QObject::destroyed, this, [this](QObject *object) {
|
|
m_discoveredConnections.remove(static_cast<SunSpecConnection *>(object));
|
|
});
|
|
|
|
return connection;
|
|
}
|
|
|
|
QList<SunSpecConnection *> IntegrationPluginSunSpec::connectionsFor(const ThingId &parentId) const
|
|
{
|
|
QList<SunSpecConnection *> connections;
|
|
|
|
SunSpecConnection *primary = m_sunSpecConnections.value(parentId);
|
|
if (primary)
|
|
connections.append(primary);
|
|
|
|
SunSpecConnection *meter = m_meterConnections.value(parentId);
|
|
if (meter)
|
|
connections.append(meter);
|
|
|
|
return connections;
|
|
}
|
|
|
|
QList<SunSpecConnection *> IntegrationPluginSunSpec::allConnections() const
|
|
{
|
|
QList<SunSpecConnection *> connections = m_sunSpecConnections.values();
|
|
connections.append(m_meterConnections.values());
|
|
return connections;
|
|
}
|
|
|
|
SunSpecConnection *IntegrationPluginSunSpec::createMeterConnection(Thing *thing)
|
|
{
|
|
if (thing->thingClassId() != froniusConnectionThingClassId)
|
|
return nullptr;
|
|
|
|
const int inverterSlaveId = thing->paramValue(m_connectionSlaveIdParamTypeIds.value(thing->thingClassId())).toInt();
|
|
const int meterSlaveId = thing->paramValue(froniusConnectionThingMeterSlaveIdParamTypeId).toInt();
|
|
|
|
switch (FroniusRules::decideMeterConnection(meterSlaveId, inverterSlaveId)) {
|
|
case FroniusRules::MeterConnectionDisabled:
|
|
qCInfo(dcSunSpec()) << "No Smart Meter configured on" << thing->name()
|
|
<< "- the meter slave ID is 0.";
|
|
return nullptr;
|
|
case FroniusRules::MeterConnectionInvalidSlaveId:
|
|
qCWarning(dcSunSpec()) << "Not connecting a Smart Meter on" << thing->name()
|
|
<< "- the meter slave ID" << meterSlaveId << "is out of range.";
|
|
return nullptr;
|
|
case FroniusRules::MeterConnectionCollidesWithInverter:
|
|
qCWarning(dcSunSpec()) << "Not connecting a Smart Meter on" << thing->name()
|
|
<< "- the meter slave ID" << meterSlaveId
|
|
<< "is the one the inverter already answers on. A second connection there"
|
|
<< "would rediscover the very same models and duplicate every child thing.";
|
|
return nullptr;
|
|
case FroniusRules::MeterConnectionCreate:
|
|
break;
|
|
}
|
|
|
|
qCDebug(dcSunSpec()) << "Creating the Smart Meter connection of" << thing->name() << "on slave ID" << meterSlaveId;
|
|
return createConnection(thing, meterSlaveId, false);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::startMeterConnection(Thing *thing)
|
|
{
|
|
SunSpecConnection *meterConnection = m_meterConnections.value(thing->id());
|
|
if (!meterConnection)
|
|
return;
|
|
|
|
if (meterConnection->connected()) {
|
|
/* Already up. Rediscover anyway, so that a meter added or removed while
|
|
* running is picked up, exactly like the primary connection does. */
|
|
meterConnection->startDiscovery();
|
|
return;
|
|
}
|
|
|
|
NetworkDeviceMonitor *monitor = m_monitors.value(thing);
|
|
if (!monitor)
|
|
return;
|
|
|
|
qCDebug(dcSunSpec()) << "Primary discovery of" << thing->name() << "is done, connecting the Smart Meter on slave ID"
|
|
<< meterConnection->slaveId();
|
|
meterConnection->setHostAddress(monitor->networkDeviceInfo().address());
|
|
meterConnection->connectDevice();
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::destroyConnections(const ThingId &thingId)
|
|
{
|
|
if (m_sunSpecConnections.contains(thingId))
|
|
m_sunSpecConnections.take(thingId)->deleteLater();
|
|
|
|
if (m_meterConnections.contains(thingId))
|
|
m_meterConnections.take(thingId)->deleteLater();
|
|
|
|
m_orphanSweepDeadlines.remove(thingId);
|
|
}
|
|
|
|
SunSpecConnection *IntegrationPluginSunSpec::connectionForChild(Thing *child) const
|
|
{
|
|
if (m_sunSpecInverters.contains(child))
|
|
return m_sunSpecInverters.value(child)->connection();
|
|
|
|
if (m_sunSpecMeters.contains(child))
|
|
return m_sunSpecMeters.value(child)->connection();
|
|
|
|
if (m_sunSpecStorages.contains(child))
|
|
return m_sunSpecStorages.value(child)->connection();
|
|
|
|
if (m_sunSpecThings.contains(child))
|
|
return m_sunSpecThings.value(child)->connection();
|
|
|
|
return nullptr;
|
|
}
|
|
|
|
SunSpecModel *IntegrationPluginSunSpec::findModelFor(const ThingId &parentId, uint modelId, int modbusStartRegister) const
|
|
{
|
|
foreach (SunSpecConnection *connection, connectionsFor(parentId)) {
|
|
foreach (SunSpecModel *model, connection->models()) {
|
|
if (model->modelId() == modelId && model->modbusStartRegister() == modbusStartRegister)
|
|
return model;
|
|
}
|
|
}
|
|
|
|
return nullptr;
|
|
}
|
|
|
|
QList<Thing *> IntegrationPluginSunSpec::childThingsOn(Thing *parent, SunSpecConnection *connection) const
|
|
{
|
|
const bool isPrimary = (m_sunSpecConnections.value(parent->id()) == connection);
|
|
|
|
QList<Thing *> children;
|
|
foreach (Thing *child, myThings().filterByParentId(parent->id())) {
|
|
SunSpecConnection *childConnection = connectionForChild(child);
|
|
if (childConnection == connection || (!childConnection && isPrimary))
|
|
children.append(child);
|
|
}
|
|
|
|
return children;
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::setupSolarEdgeBattery(ThingSetupInfo *info)
|
|
{
|
|
Thing *thing = info->thing();
|
|
int modbusStartRegister = thing->paramValue(solarEdgeBatteryThingModbusAddressParamTypeId).toUInt();
|
|
SunSpecConnection *connection = m_sunSpecConnections.value(thing->parentId());
|
|
if (!connection) {
|
|
qCWarning(dcSunSpec()) << "Could not find SunSpec parent connection for sunspec battery" << thing;
|
|
info->finish(Thing::ThingErrorHardwareNotAvailable);
|
|
return;
|
|
}
|
|
|
|
qCDebug(dcSunSpec()) << "Setting up SolarEdge battery...";
|
|
SolarEdgeBattery *battery = new SolarEdgeBattery(thing, connection, modbusStartRegister, connection);
|
|
|
|
m_sunSpecThings.insert(thing, battery);
|
|
connect(battery, &SolarEdgeBattery::blockDataUpdated, this, &IntegrationPluginSunSpec::onSolarEdgeBatteryBlockUpdated);
|
|
info->finish(Thing::ThingErrorNoError);
|
|
|
|
// Start initializing battery data
|
|
if (connection->connected())
|
|
battery->init();
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::searchSolarEdgeBatteries(SunSpecConnection *connection)
|
|
{
|
|
if (!connection->connected()) {
|
|
qCDebug(dcSunSpec()) << "Could not search for SolarEdge batteries, the connection does not seem to be available at the moment.";
|
|
return;
|
|
}
|
|
|
|
qCDebug(dcSunSpec()) << "Searching for connected SolarEdge batteries...";
|
|
ThingId parentThingId = m_sunSpecConnections.key(connection);
|
|
if (parentThingId.isNull()) {
|
|
qCWarning(dcSunSpec()) << "Could not search for SolarEdge batteries because of find parent ThingId connection for" << connection->hostAddress().toString();
|
|
return;
|
|
}
|
|
|
|
// Batteries are not mapped to the sunspec layer, so we have to treat them as normal modbus registers.
|
|
// Read the battery id to verify if the battery is connected.
|
|
// Battery 1: start register 0xE100, device id register 0xE140
|
|
// Battery 2: start register 0xE200, device id register 0xE240
|
|
searchSolarEdgeBattery(connection, parentThingId, 0xE100);
|
|
searchSolarEdgeBattery(connection, parentThingId, 0xE200);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::searchSolarEdgeBattery(SunSpecConnection *connection, const ThingId &parentThingId, quint16 startRegister)
|
|
{
|
|
// Read the battery data, if init failed there is no battery connected,
|
|
// otherwise there is a battery and we should check if we need to setup the battery thing
|
|
|
|
// Create a temporary battery object without thing for init
|
|
qCDebug(dcSunSpec()) << "Checking presence of SolarEdge battery on modbus register" << startRegister;
|
|
SolarEdgeBattery *battery = new SolarEdgeBattery(nullptr, connection, startRegister, connection);
|
|
connect(battery, &SolarEdgeBattery::initFinished, connection, [=](bool success) {
|
|
// Delete this object since we used it only for set up
|
|
battery->deleteLater();
|
|
|
|
// If init failed, no battery connected
|
|
if (!success) {
|
|
qCDebug(dcSunSpec()) << "No SolarEdge battery connected on register" << startRegister << "- not creating thing.";
|
|
return;
|
|
}
|
|
|
|
qCDebug(dcSunSpec()) << "Battery initialized successfully." << battery->batteryData().manufacturerName << battery->batteryData().model;
|
|
// Check if we already created this battery
|
|
if (!myThings().filterByParam(solarEdgeBatteryThingSerialNumberParamTypeId, battery->batteryData().serialNumber).isEmpty()) {
|
|
qCDebug(dcSunSpec()) << "Battery already set up" << battery->batteryData().serialNumber;
|
|
} else {
|
|
// Create new battery device in the system
|
|
ThingDescriptor descriptor(solarEdgeBatteryThingClassId, battery->batteryData().manufacturerName + " - " + battery->batteryData().model, QString(), parentThingId);
|
|
ParamList params;
|
|
params.append(Param(solarEdgeBatteryThingModbusAddressParamTypeId, startRegister));
|
|
params.append(Param(solarEdgeBatteryThingManufacturerParamTypeId, battery->batteryData().manufacturerName));
|
|
params.append(Param(solarEdgeBatteryThingDeviceModelParamTypeId, battery->batteryData().model));
|
|
params.append(Param(solarEdgeBatteryThingSerialNumberParamTypeId, battery->batteryData().serialNumber));
|
|
descriptor.setParams(params);
|
|
emit autoThingsAppeared({descriptor});
|
|
}
|
|
});
|
|
|
|
// Try to initialize battery data
|
|
battery->init();
|
|
}
|
|
|
|
double IntegrationPluginSunSpec::calculateSolarEdgePvProduction(Thing *thing, double acPower, double dcPower)
|
|
{
|
|
// Note: for solar edge, we need to calculate pv power from battery and AC/DC current depending
|
|
// on loading or discharging of the battery
|
|
|
|
double pvPower = acPower;
|
|
Thing *parentThing = myThings().findById(thing->parentId());
|
|
if (parentThing && parentThing->thingClassId() == solarEdgeConnectionThingClassId) {
|
|
SolarEdgeBattery *battery = nullptr;
|
|
// This is a solar edge, let's see if we have a battery for this connection
|
|
foreach (Thing *sunspecThing, m_sunSpecThings.keys()) {
|
|
if (sunspecThing->thingClassId() == solarEdgeBatteryThingClassId && thing->parentId() == parentThing->id()) {
|
|
battery = qobject_cast<SolarEdgeBattery *>(m_sunSpecThings.value(sunspecThing));
|
|
break;
|
|
}
|
|
}
|
|
|
|
// Check if we have a meter...
|
|
Thing *meterThing = nullptr;
|
|
foreach (Thing *sunspecThing, m_sunSpecMeters.keys()) {
|
|
if (thing->parentId() == parentThing->id()) {
|
|
meterThing = sunspecThing;
|
|
break;
|
|
}
|
|
}
|
|
|
|
// This is a solar edge, let's see if we have a battery for this connection
|
|
if (battery) {
|
|
double meterCurrentPower = meterThing ? meterThing->stateValue("currentPower").toDouble() : 0;
|
|
qCDebug(dcSunSpec()) << "SolarEdge: found battery for inverter: calculate actual PV power from battery DC power and inverter DC power...";
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: -------------------------------------------------------";
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: meter power:" << meterCurrentPower << "W";
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: inverter AC power:" << acPower << "W";
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: inverter DC power:" << dcPower << "W";
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: battery DC power:" << battery->batteryData().instantaneousPower << "W";
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: battery DC state:" << battery->batteryData().batteryStatus;
|
|
|
|
switch (battery->batteryData().batteryStatus) {
|
|
case SolarEdgeBattery::BatteryStatus::Charge: {
|
|
// Actual PV = inverter AC power - battery power
|
|
pvPower = acPower - battery->batteryData().instantaneousPower;
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: calculate actual PV power: inverter AC power - battery power:" << acPower << "-" << battery->batteryData().instantaneousPower << "=" << pvPower;
|
|
break;
|
|
}
|
|
case SolarEdgeBattery::BatteryStatus::Discharge: {
|
|
// Actual PV = inverter DC power + battery power
|
|
pvPower = dcPower - battery->batteryData().instantaneousPower;
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: calculate actual PV power: inverter DC power - battery power:" << dcPower << "-" << battery->batteryData().instantaneousPower << "=" << pvPower;
|
|
if (pvPower > 0) {
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: actual PV power: 0W | loss:" << pvPower << "W";
|
|
pvPower = 0;
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
// Idle: No change required, AC power is actual PV energy
|
|
pvPower = acPower;
|
|
break;
|
|
}
|
|
|
|
// Calculate self consumption
|
|
double selfConsumption = pvPower - meterCurrentPower + battery->batteryData().instantaneousPower;
|
|
qCDebug(dcSunSpec()) << "--> SolarEdge: self consumption" << selfConsumption << "W";
|
|
}
|
|
}
|
|
|
|
return pvPower;
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::autocreateSunSpecModelThing(const ThingClassId &thingClassId, const QString &thingName, const ThingId &parentId, SunSpecModel *model)
|
|
{
|
|
/* On some systems we get duplicated things having the same serial number but are on different registers.
|
|
* Those devices normally dissapear after some time again. For now, we need to prevent to even create those
|
|
* devices by filtering out those who already have been added using the serialnumber, not only the combination
|
|
* of model number and start address. */
|
|
|
|
QString serialNumber = model->commonModelInfo().serialNumber;
|
|
if (!serialNumber.isEmpty()) {
|
|
// If we have any model with this exact serial number, we skip adding this model
|
|
foreach (Thing *thing, myThings()) {
|
|
if (m_serialNumberParamTypeIds.contains(thing->thingClassId())) {
|
|
QString thingSerialNumber = thing->paramValue(m_serialNumberParamTypeIds.value(thing->thingClassId())).toString();
|
|
if (serialNumber == thingSerialNumber) {
|
|
qCWarning(dcSunSpec()) << "Trying to add a new thing for a SunSpec model, but we already have a thing with this serial number. Not adding it to the system...";
|
|
qCWarning(dcSunSpec()) << "--> Already added:" << thing << thing->params();
|
|
qCWarning(dcSunSpec()) << "--> Attempt to add:" << thingName << model
|
|
<< model->commonModelInfo().modelName
|
|
<< model->commonModelInfo().manufacturerName
|
|
<< model->commonModelInfo().serialNumber
|
|
<< model->commonModelInfo().versionString;
|
|
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
ThingDescriptor descriptor(thingClassId);
|
|
descriptor.setParentId(parentId);
|
|
QString finalThingName;
|
|
if (model->commonModelInfo().manufacturerName.isEmpty()) {
|
|
finalThingName = thingName;
|
|
} else {
|
|
finalThingName = model->commonModelInfo().manufacturerName + " " + thingName;
|
|
}
|
|
|
|
descriptor.setTitle(finalThingName);
|
|
|
|
ParamList params;
|
|
params.append(Param(m_modelIdParamTypeIds.value(descriptor.thingClassId()), model->modelId()));
|
|
params.append(Param(m_modbusAddressParamTypeIds.value(descriptor.thingClassId()), model->modbusStartRegister()));
|
|
params.append(Param(m_manufacturerParamTypeIds.value(descriptor.thingClassId()), model->commonModelInfo().manufacturerName));
|
|
params.append(Param(m_deviceModelParamTypeIds.value(descriptor.thingClassId()), model->commonModelInfo().modelName));
|
|
params.append(Param(m_serialNumberParamTypeIds.value(descriptor.thingClassId()), model->commonModelInfo().serialNumber));
|
|
|
|
/* A storage created under a Fronius connection arms the revert timer by
|
|
* default, where the generic vendor leaves it disabled. A setpoint left
|
|
* behind by a stopped HEMS would otherwise hold the customer's battery
|
|
* indefinitely. */
|
|
if (thingClassId == sunspecStorageThingClassId && isFroniusChild(parentId)) {
|
|
params.append(Param(sunspecStorageThingRevertTimeParamTypeId, FroniusRules::DefaultRevertTimeSeconds));
|
|
}
|
|
|
|
descriptor.setParams(params);
|
|
emit autoThingsAppeared({descriptor});
|
|
}
|
|
|
|
QString IntegrationPluginSunSpec::getInverterStateString(quint16 state)
|
|
{
|
|
// Note: this works because the models have all the same value
|
|
QString stateString;
|
|
switch (state) {
|
|
case SunSpecInverterSinglePhaseModel::StOff:
|
|
stateString = "Off";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StSleeping:
|
|
stateString = "Sleeping";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StStarting:
|
|
stateString = "Starting";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StMppt:
|
|
stateString = "MPPT";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StThrottled:
|
|
stateString = "Throttled";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StShuttingDown:
|
|
stateString = "Shutting down";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StFault:
|
|
stateString = "Fault";
|
|
break;
|
|
case SunSpecInverterSinglePhaseModel::StStandby:
|
|
stateString = "Standby";
|
|
break;
|
|
}
|
|
return stateString;
|
|
}
|
|
|
|
QString IntegrationPluginSunSpec::getInverterErrorString(quint32 flag)
|
|
{
|
|
// Note: this works because the models have all the same value
|
|
QStringList errorStrings;
|
|
SunSpecInverterSinglePhaseModel::Evt1Flags event1Flag = static_cast<SunSpecInverterSinglePhaseModel::Evt1Flags>(flag);
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1GroundFault)) {
|
|
errorStrings.append(QT_TR_NOOP("Ground fault"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1DcOverVolt)) {
|
|
errorStrings.append(QT_TR_NOOP("DC over voltage"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1AcDisconnect)) {
|
|
errorStrings.append(QT_TR_NOOP("AC disconnect"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1DcDisconnect)) {
|
|
errorStrings.append(QT_TR_NOOP("DC disconnect"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1GridDisconnect)) {
|
|
errorStrings.append(QT_TR_NOOP("Grid disconnect"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1CabinetOpen)) {
|
|
errorStrings.append(QT_TR_NOOP("Cabinet open"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1ManualShutdown)) {
|
|
errorStrings.append(QT_TR_NOOP("Manual shutdown"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1OverTemp)) {
|
|
errorStrings.append(QT_TR_NOOP("Over temperature"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1OverFrequency)) {
|
|
errorStrings.append(QT_TR_NOOP("Over frequency"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1UnderFrequency)) {
|
|
errorStrings.append(QT_TR_NOOP("Under frequency"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1AcOverVolt)) {
|
|
errorStrings.append(QT_TR_NOOP("AC over voltage"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1AcUnderVolt)) {
|
|
errorStrings.append(QT_TR_NOOP("AC under voltage"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1BlownStringFuse)) {
|
|
errorStrings.append(QT_TR_NOOP("Blown string fuse"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1UnderTemp)) {
|
|
errorStrings.append(QT_TR_NOOP("Under temperature"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1MemoryLoss)) {
|
|
errorStrings.append(QT_TR_NOOP("Memory loss"));
|
|
}
|
|
|
|
if (event1Flag.testFlag(SunSpecInverterSinglePhaseModel::Evt1HwTestFailure)) {
|
|
errorStrings.append(QT_TR_NOOP("Hardware test failure"));
|
|
}
|
|
|
|
if (errorStrings.isEmpty()) {
|
|
return QT_TR_NOOP("No error");
|
|
} else {
|
|
return errorStrings.join(", ");
|
|
}
|
|
}
|
|
|
|
double IntegrationPluginSunSpec::fixValueSign(double targetValue, double powerValue)
|
|
{
|
|
// Some sunspec devices (i.e. SolarEdge return an absolute value on the phase current.
|
|
// This method makes sure the phase current has the same sign as the phase power value.
|
|
bool sameSign = ((targetValue < 0) == (powerValue < 0));
|
|
return (sameSign ? targetValue : -targetValue);
|
|
}
|
|
|
|
bool IntegrationPluginSunSpec::hasManufacturer(const QStringList &manufacturers, const QString &manufacturer)
|
|
{
|
|
foreach (const QString &name, manufacturers) {
|
|
if (name.toLower().contains(manufacturer.toLower())) {
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::markThingStatesDisconnected(Thing *thing)
|
|
{
|
|
qCDebug(dcSunSpec()) << thing << "is now disconnected. Setting energy live data to 0.";
|
|
if (thing->thingClassId() == sunspecSinglePhaseInverterThingClassId) {
|
|
thing->setStateValue(sunspecSinglePhaseInverterConnectedStateTypeId, false);
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterTotalCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterFrequencyStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterPhaseVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterVoltageDcStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentDcStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentPowerDcStateTypeId, 0);
|
|
} else if (thing->thingClassId() == sunspecSplitPhaseInverterThingClassId) {
|
|
thing->setStateValue(sunspecSplitPhaseInverterConnectedStateTypeId, false);
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterTotalCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterFrequencyStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseANVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseBNVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseACurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseBCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterVoltageDcStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentDcStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentPowerDcStateTypeId, 0);
|
|
} else if (thing->thingClassId() == sunspecThreePhaseInverterThingClassId) {
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecThreePhaseInverterConnectedStateTypeId, false);
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterTotalCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterFrequencyStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseANVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseBNVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseCNVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseACurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseBCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseCCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterVoltageDcStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentDcStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentPowerDcStateTypeId, 0);
|
|
} else if (thing->thingClassId() == sunspecSinglePhaseMeterThingClassId) {
|
|
thing->setStateValue(sunspecSinglePhaseMeterConnectedStateTypeId, false);
|
|
thing->setStateValue(sunspecSinglePhaseMeterCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterCurrentPhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterVoltagePhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterFrequencyStateTypeId, 0);
|
|
} else if (thing->thingClassId() == sunspecSplitPhaseMeterThingClassId) {
|
|
thing->setStateValue(sunspecSplitPhaseMeterConnectedStateTypeId, false);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalCurrentStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerPhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerPhaseBStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPhaseBStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterLnACVoltageStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterVoltagePhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterVoltagePhaseBStateTypeId, 0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterFrequencyStateTypeId,0 );
|
|
} else if (thing->thingClassId() == sunspecThreePhaseMeterThingClassId) {
|
|
thing->setStateValue(sunspecThreePhaseMeterConnectedStateTypeId, false);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseBStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseCStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseBStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseCStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseAStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseBStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseCStateTypeId, 0);
|
|
thing->setStateValue(sunspecThreePhaseMeterFrequencyStateTypeId, 0);
|
|
} else if (thing->thingClassId() == sunspecStorageThingClassId) {
|
|
thing->setStateValue(sunspecStorageConnectedStateTypeId, false);
|
|
/* Zeroed, like every other power state of this plugin: nymea's power
|
|
* balance keeps summing a disconnected energystorage, and a stale
|
|
* value would be asserted as a measurement long after the inverter
|
|
* stopped answering. `capacity` is deliberately left alone - it is a
|
|
* nameplate figure, and losing the link does not shrink the battery. */
|
|
thing->setStateValue(sunspecStorageCurrentPowerStateTypeId, 0);
|
|
thing->setStateValue(sunspecStorageGridChargingStateTypeId, false);
|
|
thing->setStateValue(sunspecStorageChargingRateStateTypeId, 0);
|
|
thing->setStateValue(sunspecStorageDischargingRateStateTypeId, 0);
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Off");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "idle");
|
|
} else if (thing->thingClassId() == solarEdgeBatteryThingClassId) {
|
|
thing->setStateValue(solarEdgeBatteryConnectedStateTypeId, false);
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Idle");
|
|
thing->setStateValue(solarEdgeBatteryChargingStateStateTypeId, "idle");
|
|
thing->setStateValue(solarEdgeBatteryInstantaneousVoltageStateTypeId, 0);
|
|
thing->setStateValue(solarEdgeBatteryInstantaneousCurrentStateTypeId, 0);
|
|
thing->setStateValue(solarEdgeBatteryCurrentPowerStateTypeId, 0);
|
|
}
|
|
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onRefreshTimer()
|
|
{
|
|
// Update meters
|
|
foreach (SunSpecModel *model, m_sunSpecMeters.values()) {
|
|
if (model->connection()->connected()) {
|
|
model->readBlockData();
|
|
}
|
|
}
|
|
|
|
// Update storage
|
|
foreach (SunSpecModel *model, m_sunSpecStorages.values()) {
|
|
if (model->connection()->connected()) {
|
|
model->readBlockData();
|
|
}
|
|
}
|
|
|
|
/* Companion models of the storage things. Deduplicated: two storage things
|
|
* on the same inverter share one model 160, and reading it twice per cycle
|
|
* would double the Modbus traffic for the same 90 registers.
|
|
*
|
|
* Whole model, one readBlockData() each, never a partial read: the power of
|
|
* the battery blocks is only meaningful next to the scale factor of the
|
|
* same transaction. See the read order note above
|
|
* storageModuleReadings(). */
|
|
QSet<SunSpecModel *> storageCompanions;
|
|
foreach (SunSpecMpptModel *model, m_storageMpptModels.values())
|
|
storageCompanions.insert(model);
|
|
foreach (SunSpecNameplateModel *model, m_storageNameplateModels.values())
|
|
storageCompanions.insert(model);
|
|
|
|
foreach (SunSpecModel *model, storageCompanions) {
|
|
if (model->connection()->connected()) {
|
|
model->readBlockData();
|
|
}
|
|
}
|
|
|
|
// Update all other sunspec thing blocks
|
|
foreach (SunSpecThing *sunSpecThing, m_sunSpecThings) {
|
|
if (sunSpecThing->connection()->connected()) {
|
|
sunSpecThing->readBlockData();
|
|
}
|
|
}
|
|
|
|
// Update inverters
|
|
foreach (SunSpecModel *model, m_sunSpecInverters.values()) {
|
|
if (model->connection()->connected()) {
|
|
model->readBlockData();
|
|
}
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onPluginConfigurationChanged(const ParamTypeId ¶mTypeId, const QVariant &value)
|
|
{
|
|
// Check refresh schedule
|
|
if (paramTypeId == sunSpecPluginUpdateIntervalParamTypeId) {
|
|
qCDebug(dcSunSpec()) << "Update interval has changed" << value.toInt();
|
|
if (m_refreshTimer) {
|
|
int refreshTime = effectiveUpdateInterval();
|
|
m_refreshTimer->stop();
|
|
hardwareManager()->pluginTimerManager()->unregisterTimer(m_refreshTimer);
|
|
m_refreshTimer = hardwareManager()->pluginTimerManager()->registerTimer(refreshTime);
|
|
connect(m_refreshTimer, &PluginTimer::timeout, this, &IntegrationPluginSunSpec::onRefreshTimer);
|
|
m_refreshTimer->start();
|
|
}
|
|
} else if (paramTypeId == sunSpecPluginNumberOfRetriesParamTypeId) {
|
|
qCDebug(dcSunSpec()) << "Updating number of retries" << value.toUInt();
|
|
foreach (SunSpecConnection *connection, allConnections()) {
|
|
connection->setNumberOfRetries(value.toUInt());
|
|
}
|
|
} else if (paramTypeId == sunSpecPluginTimeoutParamTypeId) {
|
|
qCDebug(dcSunSpec()) << "Updating timeout" << value.toUInt() << "[ms]";
|
|
foreach (SunSpecConnection *connection, allConnections()) {
|
|
connection->setTimeout(value.toUInt());
|
|
}
|
|
} else {
|
|
qCWarning(dcSunSpec()) << "Unknown plugin configuration" << paramTypeId << "Value" << value;
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onInverterBlockUpdated()
|
|
{
|
|
SunSpecModel *model = qobject_cast<SunSpecModel *>(sender());
|
|
Thing *thing = m_sunSpecInverters.key(model);
|
|
if (!thing) return;
|
|
|
|
// Get parent thing
|
|
Thing *parentThing = myThings().findById(thing->parentId());
|
|
if (!parentThing)
|
|
return;
|
|
|
|
switch (model->modelId()) {
|
|
case SunSpecModelFactory::ModelIdInverterSinglePhase: {
|
|
SunSpecInverterSinglePhaseModel *inverter = qobject_cast<SunSpecInverterSinglePhaseModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecSinglePhaseInverterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSinglePhaseInverterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
// Note: solar edge needs some calculations for the current pv power
|
|
double currentPower = calculateSolarEdgePvProduction(thing, -inverter->watts(), -inverter->dcWatts());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentPowerStateTypeId, currentPower);
|
|
evaluateEnergyProducedValue(thing, inverter->wattHours() / 1000.0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterTotalCurrentStateTypeId, inverter->amps());
|
|
thing->setStateValue(sunspecSinglePhaseInverterFrequencyStateTypeId, inverter->hz());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCabinetTemperatureStateTypeId, inverter->cabinetTemperature());
|
|
thing->setStateValue(sunspecSinglePhaseInverterPhaseVoltageStateTypeId, inverter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSinglePhaseInverterOperatingStateStateTypeId, getInverterStateString(inverter->operatingState()));
|
|
thing->setStateValue(sunspecSinglePhaseInverterErrorStateTypeId, getInverterErrorString(inverter->event1()));
|
|
thing->setStateValue(sunspecSinglePhaseInverterVoltageDcStateTypeId, inverter->dcVoltage());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentDcStateTypeId, inverter->dcAmps());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentPowerDcStateTypeId, -inverter->dcWatts());
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdInverterSinglePhaseFloat: {
|
|
SunSpecInverterSinglePhaseFloatModel *inverter = qobject_cast<SunSpecInverterSinglePhaseFloatModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecSinglePhaseInverterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSinglePhaseInverterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
// Note: solar edge needs some calculations for the current pv power
|
|
double currentPower = calculateSolarEdgePvProduction(thing, -inverter->watts(), -inverter->dcWatts());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentPowerStateTypeId, currentPower);
|
|
evaluateEnergyProducedValue(thing, inverter->wattHours() / 1000.0);
|
|
thing->setStateValue(sunspecSinglePhaseInverterTotalCurrentStateTypeId, inverter->amps());
|
|
thing->setStateValue(sunspecSinglePhaseInverterFrequencyStateTypeId, inverter->hz());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCabinetTemperatureStateTypeId, inverter->cabinetTemperature());
|
|
thing->setStateValue(sunspecSinglePhaseInverterPhaseVoltageStateTypeId, inverter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSinglePhaseInverterOperatingStateStateTypeId, getInverterStateString(inverter->operatingState()));
|
|
thing->setStateValue(sunspecSinglePhaseInverterErrorStateTypeId, getInverterErrorString(inverter->event1()));
|
|
thing->setStateValue(sunspecSinglePhaseInverterVoltageDcStateTypeId, inverter->dcVoltage());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentDcStateTypeId, inverter->dcAmps());
|
|
thing->setStateValue(sunspecSinglePhaseInverterCurrentPowerDcStateTypeId, -inverter->dcWatts());
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdInverterSplitPhase: {
|
|
SunSpecInverterSplitPhaseModel *inverter = qobject_cast<SunSpecInverterSplitPhaseModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecSplitPhaseInverterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSplitPhaseInverterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
double currentPower = calculateSolarEdgePvProduction(thing, -inverter->watts(), -inverter->dcWatts());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentPowerStateTypeId, currentPower);
|
|
evaluateEnergyProducedValue(thing, inverter->wattHours() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterTotalCurrentStateTypeId, inverter->amps());
|
|
thing->setStateValue(sunspecSplitPhaseInverterFrequencyStateTypeId, inverter->hz());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCabinetTemperatureStateTypeId, inverter->cabinetTemperature());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseANVoltageStateTypeId, inverter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseBNVoltageStateTypeId, inverter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseACurrentStateTypeId, inverter->ampsPhaseA());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseBCurrentStateTypeId, inverter->ampsPhaseB());
|
|
thing->setStateValue(sunspecSplitPhaseInverterOperatingStateStateTypeId, getInverterStateString(inverter->operatingState()));
|
|
thing->setStateValue(sunspecSplitPhaseInverterErrorStateTypeId, getInverterErrorString(inverter->event1()));
|
|
thing->setStateValue(sunspecSplitPhaseInverterVoltageDcStateTypeId, inverter->dcVoltage());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentDcStateTypeId, inverter->dcAmps());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentPowerDcStateTypeId, -inverter->dcWatts());
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdInverterSplitPhaseFloat: {
|
|
SunSpecInverterSplitPhaseFloatModel *inverter = qobject_cast<SunSpecInverterSplitPhaseFloatModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecSplitPhaseInverterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSplitPhaseInverterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
double currentPower = calculateSolarEdgePvProduction(thing, -inverter->watts(), -inverter->dcWatts());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentPowerStateTypeId, currentPower);
|
|
evaluateEnergyProducedValue(thing, inverter->wattHours() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseInverterTotalCurrentStateTypeId, inverter->amps());
|
|
thing->setStateValue(sunspecSplitPhaseInverterFrequencyStateTypeId, inverter->hz());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCabinetTemperatureStateTypeId, inverter->cabinetTemperature());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseANVoltageStateTypeId, inverter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseBNVoltageStateTypeId, inverter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseACurrentStateTypeId, inverter->ampsPhaseA());
|
|
thing->setStateValue(sunspecSplitPhaseInverterPhaseBCurrentStateTypeId, inverter->ampsPhaseB());
|
|
thing->setStateValue(sunspecSplitPhaseInverterOperatingStateStateTypeId, getInverterStateString(inverter->operatingState()));
|
|
thing->setStateValue(sunspecSplitPhaseInverterErrorStateTypeId, getInverterErrorString(inverter->event1()));
|
|
thing->setStateValue(sunspecSplitPhaseInverterVoltageDcStateTypeId, inverter->dcVoltage());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentDcStateTypeId, inverter->dcAmps());
|
|
thing->setStateValue(sunspecSplitPhaseInverterCurrentPowerDcStateTypeId, -inverter->dcWatts());
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdInverterThreePhase: {
|
|
SunSpecInverterThreePhaseModel *inverter = qobject_cast<SunSpecInverterThreePhaseModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecThreePhaseInverterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecThreePhaseInverterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
double currentPower = calculateSolarEdgePvProduction(thing, -inverter->watts(), -inverter->dcWatts());
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentPowerStateTypeId, currentPower);
|
|
evaluateEnergyProducedValue(thing, inverter->wattHours() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseInverterTotalCurrentStateTypeId, inverter->amps());
|
|
thing->setStateValue(sunspecThreePhaseInverterFrequencyStateTypeId, inverter->hz());
|
|
thing->setStateValue(sunspecThreePhaseInverterCabinetTemperatureStateTypeId, inverter->cabinetTemperature());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseANVoltageStateTypeId, inverter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseBNVoltageStateTypeId, inverter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseCNVoltageStateTypeId, inverter->phaseVoltageCn());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseACurrentStateTypeId, inverter->ampsPhaseA());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseBCurrentStateTypeId, inverter->ampsPhaseB());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseCCurrentStateTypeId, inverter->ampsPhaseC());
|
|
thing->setStateValue(sunspecThreePhaseInverterOperatingStateStateTypeId, getInverterStateString(inverter->operatingState()));
|
|
thing->setStateValue(sunspecThreePhaseInverterErrorStateTypeId, getInverterErrorString(inverter->event1()));
|
|
thing->setStateValue(sunspecThreePhaseInverterVoltageDcStateTypeId, inverter->dcVoltage());
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentDcStateTypeId, inverter->dcAmps());
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentPowerDcStateTypeId, -inverter->dcWatts());
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdInverterThreePhaseFloat: {
|
|
SunSpecInverterThreePhaseFloatModel *inverter = qobject_cast<SunSpecInverterThreePhaseFloatModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << inverter;
|
|
thing->setStateValue(sunspecThreePhaseInverterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecThreePhaseInverterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
double currentPower = calculateSolarEdgePvProduction(thing, -inverter->watts(), -inverter->dcWatts());
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentPowerStateTypeId, currentPower);
|
|
evaluateEnergyProducedValue(thing, inverter->wattHours() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseInverterTotalCurrentStateTypeId, inverter->amps());
|
|
thing->setStateValue(sunspecThreePhaseInverterFrequencyStateTypeId, inverter->hz());
|
|
thing->setStateValue(sunspecThreePhaseInverterCabinetTemperatureStateTypeId, inverter->cabinetTemperature());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseANVoltageStateTypeId, inverter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseBNVoltageStateTypeId, inverter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseCNVoltageStateTypeId, inverter->phaseVoltageCn());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseACurrentStateTypeId, inverter->ampsPhaseA());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseBCurrentStateTypeId, inverter->ampsPhaseB());
|
|
thing->setStateValue(sunspecThreePhaseInverterPhaseCCurrentStateTypeId, inverter->ampsPhaseC());
|
|
thing->setStateValue(sunspecThreePhaseInverterOperatingStateStateTypeId, getInverterStateString(inverter->operatingState()));
|
|
thing->setStateValue(sunspecThreePhaseInverterErrorStateTypeId, getInverterErrorString(inverter->event1()));
|
|
thing->setStateValue(sunspecThreePhaseInverterVoltageDcStateTypeId, inverter->dcVoltage());
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentDcStateTypeId, inverter->dcAmps());
|
|
thing->setStateValue(sunspecThreePhaseInverterCurrentPowerDcStateTypeId, -inverter->dcWatts());
|
|
break;
|
|
}
|
|
default:
|
|
qCWarning(dcSunSpec()) << "Received block data from unhandled model" << model;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onMeterBlockUpdated()
|
|
{
|
|
SunSpecModel *model = qobject_cast<SunSpecModel *>(sender());
|
|
Thing *thing = m_sunSpecMeters.key(model);
|
|
if (!thing) return;
|
|
|
|
// Get parent thing
|
|
Thing *parentThing = myThings().findById(thing->parentId());
|
|
if (!parentThing)
|
|
return;
|
|
|
|
/* Sign applied to every power reading of this block. The generic vendors
|
|
* keep the historical negation; a meter sitting under a Fronius connection
|
|
* already reports in the nymea convention. See FroniusRules. */
|
|
const double powerSign = FroniusRules::meterPowerSign(
|
|
parentThing->thingClassId() == froniusConnectionThingClassId);
|
|
|
|
switch (model->modelId()) {
|
|
case SunSpecModelFactory::ModelIdMeterSinglePhase: {
|
|
SunSpecMeterSinglePhaseModel *meter = qobject_cast<SunSpecMeterSinglePhaseModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecSinglePhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSinglePhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecSinglePhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterCurrentPhaseAStateTypeId, powerSign * meter->ampsPhaseA());
|
|
thing->setStateValue(sunspecSinglePhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSinglePhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecSinglePhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdMeterSinglePhaseFloat: {
|
|
SunSpecMeterSinglePhaseFloatModel *meter = qobject_cast<SunSpecMeterSinglePhaseFloatModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecSinglePhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSinglePhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecSinglePhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecSinglePhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->watts()));
|
|
thing->setStateValue(sunspecSinglePhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSinglePhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecSinglePhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdMeterSplitSinglePhaseAbn: {
|
|
SunSpecMeterSplitSinglePhaseAbnModel *meter = qobject_cast<SunSpecMeterSplitSinglePhaseAbnModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecSplitPhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyConsumedPhaseAStateTypeId, meter->totalWattHoursImportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyConsumedPhaseBStateTypeId, meter->totalWattHoursImportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyProducedPhaseAStateTypeId, meter->totalWattHoursExportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyProducedPhaseBStateTypeId, meter->totalWattHoursExportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalCurrentStateTypeId, fixValueSign(meter->amps(), powerSign * meter->watts()));
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerPhaseAStateTypeId, powerSign * meter->wattsPhaseA());
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerPhaseBStateTypeId, powerSign * meter->wattsPhaseB());
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->wattsPhaseA()));
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPhaseBStateTypeId, fixValueSign(meter->ampsPhaseB(), powerSign * meter->wattsPhaseB()));
|
|
thing->setStateValue(sunspecSplitPhaseMeterLnACVoltageStateTypeId, meter->voltageLn());
|
|
thing->setStateValue(sunspecSplitPhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSplitPhaseMeterVoltagePhaseBStateTypeId, meter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecSplitPhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecSplitPhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdMeterSplitSinglePhaseFloat: {
|
|
SunSpecMeterSplitSinglePhaseFloatModel *meter = qobject_cast<SunSpecMeterSplitSinglePhaseFloatModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecSplitPhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyConsumedPhaseAStateTypeId, meter->totalWattHoursImportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyConsumedPhaseBStateTypeId, meter->totalWattHoursImportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyProducedPhaseAStateTypeId, meter->totalWattHoursExportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterEnergyProducedPhaseBStateTypeId, meter->totalWattHoursExportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecSplitPhaseMeterTotalCurrentStateTypeId, fixValueSign(meter->amps(), powerSign * meter->watts()));
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerPhaseAStateTypeId, powerSign * meter->wattsPhaseA());
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPowerPhaseBStateTypeId, powerSign * meter->wattsPhaseB());
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->wattsPhaseA()));
|
|
thing->setStateValue(sunspecSplitPhaseMeterCurrentPhaseBStateTypeId, fixValueSign(meter->ampsPhaseB(), powerSign * meter->wattsPhaseB()));
|
|
thing->setStateValue(sunspecSplitPhaseMeterLnACVoltageStateTypeId, meter->voltageLn());
|
|
thing->setStateValue(sunspecSplitPhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecSplitPhaseMeterVoltagePhaseBStateTypeId, meter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecSplitPhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecSplitPhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdMeterThreePhase: {
|
|
SunSpecMeterThreePhaseModel *meter = qobject_cast<SunSpecMeterThreePhaseModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecThreePhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseAStateTypeId, meter->totalWattHoursImportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseBStateTypeId, meter->totalWattHoursImportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseCStateTypeId, meter->totalWattHoursImportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseAStateTypeId, meter->totalWattHoursExportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseBStateTypeId, meter->totalWattHoursExportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseCStateTypeId, meter->totalWattHoursExportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseAStateTypeId, powerSign * meter->wattsPhaseA());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseBStateTypeId, powerSign * meter->wattsPhaseB());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseCStateTypeId, powerSign * meter->wattsPhaseC());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->wattsPhaseA()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseBStateTypeId, fixValueSign(meter->ampsPhaseB(), powerSign * meter->wattsPhaseB()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseCStateTypeId, fixValueSign(meter->ampsPhaseC(), powerSign * meter->wattsPhaseC()));
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseBStateTypeId, meter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseCStateTypeId, meter->phaseVoltageCn());
|
|
thing->setStateValue(sunspecThreePhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecThreePhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdDeltaConnectThreePhaseAbcMeter: {
|
|
SunSpecDeltaConnectThreePhaseAbcMeterModel *meter = qobject_cast<SunSpecDeltaConnectThreePhaseAbcMeterModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecThreePhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseAStateTypeId, meter->totalWattHoursImportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseBStateTypeId, meter->totalWattHoursImportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseCStateTypeId, meter->totalWattHoursImportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseAStateTypeId, meter->totalWattHoursExportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseBStateTypeId, meter->totalWattHoursExportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseCStateTypeId, meter->totalWattHoursExportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseAStateTypeId, powerSign * meter->wattsPhaseA());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseBStateTypeId, powerSign * meter->wattsPhaseB());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseCStateTypeId, powerSign * meter->wattsPhaseC());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->wattsPhaseA()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseBStateTypeId, fixValueSign(meter->ampsPhaseB(), powerSign * meter->wattsPhaseB()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseCStateTypeId, fixValueSign(meter->ampsPhaseC(), powerSign * meter->wattsPhaseC()));
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseBStateTypeId, meter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseCStateTypeId, meter->phaseVoltageCn());
|
|
thing->setStateValue(sunspecThreePhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecThreePhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdMeterThreePhaseWyeConnect: {
|
|
SunSpecMeterThreePhaseWyeConnectModel *meter = qobject_cast<SunSpecMeterThreePhaseWyeConnectModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecThreePhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseAStateTypeId, meter->totalWattHoursImportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseBStateTypeId, meter->totalWattHoursImportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseCStateTypeId, meter->totalWattHoursImportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseAStateTypeId, meter->totalWattHoursExportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseBStateTypeId, meter->totalWattHoursExportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseCStateTypeId, meter->totalWattHoursExportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseAStateTypeId, powerSign * meter->wattsPhaseA());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseBStateTypeId, powerSign * meter->wattsPhaseB());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseCStateTypeId, powerSign * meter->wattsPhaseC());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->wattsPhaseA()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseBStateTypeId, fixValueSign(meter->ampsPhaseB(), powerSign * meter->wattsPhaseB()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseCStateTypeId, fixValueSign(meter->ampsPhaseC(), powerSign * meter->wattsPhaseC()));
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseBStateTypeId, meter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseCStateTypeId, meter->phaseVoltageCn());
|
|
thing->setStateValue(sunspecThreePhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecThreePhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
case SunSpecModelFactory::ModelIdMeterThreePhaseDeltaConnect: {
|
|
SunSpecMeterThreePhaseDeltaConnectModel *meter = qobject_cast<SunSpecMeterThreePhaseDeltaConnectModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << meter;
|
|
thing->setStateValue(sunspecThreePhaseMeterConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyProducedStateTypeId, meter->totalWattHoursExported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterTotalEnergyConsumedStateTypeId, meter->totalWattHoursImported() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseAStateTypeId, meter->totalWattHoursImportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseBStateTypeId, meter->totalWattHoursImportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyConsumedPhaseCStateTypeId, meter->totalWattHoursImportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseAStateTypeId, meter->totalWattHoursExportedPhaseA() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseBStateTypeId, meter->totalWattHoursExportedPhaseB() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterEnergyProducedPhaseCStateTypeId, meter->totalWattHoursExportedPhaseC() / 1000.0);
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerStateTypeId, powerSign * meter->watts());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseAStateTypeId, powerSign * meter->wattsPhaseA());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseBStateTypeId, powerSign * meter->wattsPhaseB());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPowerPhaseCStateTypeId, powerSign * meter->wattsPhaseC());
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseAStateTypeId, fixValueSign(meter->ampsPhaseA(), powerSign * meter->wattsPhaseA()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseBStateTypeId, fixValueSign(meter->ampsPhaseB(), powerSign * meter->wattsPhaseB()));
|
|
thing->setStateValue(sunspecThreePhaseMeterCurrentPhaseCStateTypeId, fixValueSign(meter->ampsPhaseC(), powerSign * meter->wattsPhaseC()));
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseAStateTypeId, meter->phaseVoltageAn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseBStateTypeId, meter->phaseVoltageBn());
|
|
thing->setStateValue(sunspecThreePhaseMeterVoltagePhaseCStateTypeId, meter->phaseVoltageCn());
|
|
thing->setStateValue(sunspecThreePhaseMeterFrequencyStateTypeId, meter->hz());
|
|
thing->setStateValue(sunspecThreePhaseMeterVersionStateTypeId, model->commonModelInfo().versionString);
|
|
break;
|
|
}
|
|
default:
|
|
qCWarning(dcSunSpec()) << "Received block data from unhandled model" << model;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onStorageBlockUpdated()
|
|
{
|
|
SunSpecModel *model = qobject_cast<SunSpecModel *>(sender());
|
|
Thing *thing = m_sunSpecStorages.key(model);
|
|
if (!thing) return;
|
|
|
|
SunSpecStorageModel *storage = qobject_cast<SunSpecStorageModel *>(model);
|
|
qCDebug(dcSunSpec()) << thing->name() << "block data updated";// << storage;
|
|
|
|
thing->setStateValue(sunspecStorageConnectedStateTypeId, true);
|
|
thing->setStateValue(sunspecStorageVersionStateTypeId, model->commonModelInfo().versionString);
|
|
|
|
const SunSpecStorageLogic::StorageStates states = SunSpecStorageLogic::readStates(storage);
|
|
|
|
thing->setStateValue(sunspecStorageBatteryCriticalStateTypeId, states.batteryCritical);
|
|
thing->setStateValue(sunspecStorageBatteryLevelStateTypeId, states.batteryLevel);
|
|
thing->setStateValue(sunspecStorageGridChargingStateTypeId, states.gridCharging);
|
|
thing->setStateValue(sunspecStorageEnableChargingStateTypeId, states.enableCharging);
|
|
thing->setStateValue(sunspecStorageEnableDischargingStateTypeId, states.enableDischarging);
|
|
thing->setStateValue(sunspecStorageChargingRateStateTypeId, states.chargingRate);
|
|
thing->setStateValue(sunspecStorageDischargingRateStateTypeId, states.dischargingRate);
|
|
thing->setStateValue(sunspecStorageChargeGradientStateTypeId, states.chargeGradient);
|
|
thing->setStateValue(sunspecStorageDischargeGradientStateTypeId, states.dischargeGradient);
|
|
|
|
switch (storage->chaSt()) {
|
|
case SunSpecStorageModel::ChastOff:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Off");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "idle");
|
|
break;
|
|
case SunSpecStorageModel::ChastEmpty:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Empty");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "idle");
|
|
break;
|
|
case SunSpecStorageModel::ChastDischarging:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Discharging");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "discharging");
|
|
break;
|
|
case SunSpecStorageModel::ChastCharging:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Charging");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "charging");
|
|
break;
|
|
case SunSpecStorageModel::ChastFull:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Full");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "idle");
|
|
break;
|
|
case SunSpecStorageModel::ChastHolding:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Holding");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "idle");
|
|
break;
|
|
case SunSpecStorageModel::ChastTesting:
|
|
thing->setStateValue(sunspecStorageStorageStatusStateTypeId, "Testing");
|
|
thing->setStateValue(sunspecStorageChargingStateStateTypeId, "idle");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Model 124 describes what the battery IS - its state of charge, its status,
|
|
* its setpoints - and nothing about what it is DOING in watts. There is no
|
|
* power point anywhere in that model. The instantaneous power of a Fronius
|
|
* storage lives in model 160, split over two blocks named `StCha` and
|
|
* `StDisCha`, and the rated capacity lives in WHRtg of model 120.
|
|
*
|
|
* Hence this binding: the storage thing stays keyed on its model 124, and
|
|
* borrows the two other models of the same connection to fill the two states
|
|
* the energystorage interface requires. */
|
|
void IntegrationPluginSunSpec::bindStorageCompanionModels(Thing *thing, SunSpecModel *storageModel)
|
|
{
|
|
if (!thing || !storageModel || !storageModel->connection())
|
|
return;
|
|
|
|
/* The same connection as the model 124, never a search across the parent:
|
|
* a Fronius thing carries two connections, and the model 160 of the
|
|
* inverter must not be paired with a storage read from the meter unit. */
|
|
SunSpecConnection *connection = storageModel->connection();
|
|
|
|
foreach (SunSpecModel *model, connection->models()) {
|
|
if (model->modelId() == SunSpecModelFactory::ModelIdMppt) {
|
|
SunSpecMpptModel *mppt = qobject_cast<SunSpecMpptModel *>(model);
|
|
if (mppt && m_storageMpptModels.value(thing) != mppt) {
|
|
m_storageMpptModels.insert(thing, mppt);
|
|
connect(mppt, &SunSpecModel::blockUpdated, this,
|
|
&IntegrationPluginSunSpec::onStorageMpptBlockUpdated, Qt::UniqueConnection);
|
|
qCDebug(dcSunSpec()) << "Storage" << thing->name() << "takes its power from" << mppt;
|
|
}
|
|
} else if (model->modelId() == SunSpecModelFactory::ModelIdNameplate) {
|
|
SunSpecNameplateModel *nameplate = qobject_cast<SunSpecNameplateModel *>(model);
|
|
if (nameplate && m_storageNameplateModels.value(thing) != nameplate) {
|
|
m_storageNameplateModels.insert(thing, nameplate);
|
|
connect(nameplate, &SunSpecModel::blockUpdated, this,
|
|
&IntegrationPluginSunSpec::onStorageNameplateBlockUpdated, Qt::UniqueConnection);
|
|
qCDebug(dcSunSpec()) << "Storage" << thing->name() << "takes its capacity from" << nameplate;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!m_storageMpptModels.contains(thing)) {
|
|
/* Said once, and said loudly. This thing now claims the energystorage
|
|
* interface, so nymea's power balance and the storage reserve of the
|
|
* arbiter will read its currentPower - and it will never leave zero.
|
|
* A filter that finds a battery reporting a flat zero is worse than a
|
|
* filter that finds none: the first reads as "neither charging nor
|
|
* discharging", the second as "no battery". */
|
|
if (!m_storagesWarnedWithoutPowerSource.contains(thing->id())) {
|
|
m_storagesWarnedWithoutPowerSource.insert(thing->id());
|
|
qCWarning(dcSunSpec()) << "Storage" << thing->name() << "has no model 160 on its connection:"
|
|
<< "currentPower has no register to read and will stay at 0."
|
|
<< "This storage is visible to the energy balance but not measurable.";
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* Publish straight away, so a thing bound after a discovery does not wait a
|
|
* whole refresh cycle. Both updaters return quietly when their model has
|
|
* nothing readable yet - a single guard, inside them, rather than a second
|
|
* one here that would have to be kept in step. */
|
|
updateStorageCurrentPower(thing);
|
|
updateStorageCapacity(thing);
|
|
}
|
|
|
|
/* ORDRE DE LECTURE - ne pas "optimiser" la lecture du modele 160.
|
|
*
|
|
* `dcPower()` rend une valeur DEJA multipliee par `DCW_SF`. Ce facteur d'echelle
|
|
* n'est pas une constante de l'appareil : Fronius l'auto-scale EN
|
|
* FONCTIONNEMENT, sans hysteresis. Mesure du 2026-08-26 sur le banc, meme
|
|
* onduleur, deux relevees a quelques secondes d'intervalle :
|
|
*
|
|
* batterie a l'arret, PV faible -> DCW_SF = -2
|
|
* batterie en charge 2000 W -> DCW_SF = -1
|
|
*
|
|
* Un `DCW` brut de 20000 vaut donc 200,0 W avec le premier facteur et 2000,0 W
|
|
* avec le second. Lire la puissance avec un facteur qui n'est pas celui de la
|
|
* MEME transaction, c'est se tromper d'un ordre de grandeur - meme famille de
|
|
* degat que l'ordre des mots des float32 (D-8), mais bien plus discret : la
|
|
* valeur reste plausible, elle est juste dix fois trop petite ou trop grande.
|
|
*
|
|
* Ce qui protege aujourd'hui :
|
|
*
|
|
* 1. `SunSpecModel::readBlockData()` lit les 90 registres du modele 160 en UNE
|
|
* transaction Modbus (la limite de decoupage est a 125 registres), donc les
|
|
* facteurs d'echelle et les puissances viennent du meme instantane ;
|
|
* 2. `SunSpecModel::handleNewBlockData()` appelle `processBlockData()` du bloc
|
|
* FIXE - qui relit `DCA_SF`/`DCV_SF`/`DCW_SF`/`DCWH_SF` - AVANT de traiter
|
|
* les blocs repetes, qui lisent ce facteur chez leur parent.
|
|
*
|
|
* Ces deux proprietes sont dans libnymea-sunspec, pas ici, et rien dans le
|
|
* compilateur ne les tient. Les casser en amont - decouper la lecture, mettre
|
|
* les facteurs en cache a la decouverte, traiter les blocs repetes en premier,
|
|
* ou lire un bloc repete isolement - casserait cette fonction SANS AUCUN SIGNE
|
|
* EXTERIEUR : pas d'erreur Modbus, pas de denormal, un appareil qui se declare
|
|
* `connected`. Toute reprise de la lecture du modele 160 doit etre rejouee au
|
|
* banc contre une puissance batterie connue, pas seulement compilee.
|
|
*
|
|
* Contrat Fronius I5, et D-9 dans DIVERGENCES.md. */
|
|
QList<FroniusRules::ModuleReading> IntegrationPluginSunSpec::storageModuleReadings(Thing *thing) const
|
|
{
|
|
QList<FroniusRules::ModuleReading> readings;
|
|
|
|
SunSpecMpptModel *mppt = m_storageMpptModels.value(thing);
|
|
if (!mppt)
|
|
return readings;
|
|
|
|
foreach (SunSpecModelRepeatingBlock *block, mppt->repeatingBlocks()) {
|
|
SunSpecMpptModelRepeatingBlock *module = qobject_cast<SunSpecMpptModelRepeatingBlock *>(block);
|
|
if (!module)
|
|
continue;
|
|
|
|
/* Keyed on the ID string, never on the block index: on a three or four
|
|
* MPPT inverter the battery blocks are not in position 3 and 4. */
|
|
readings.append({module->inputIdSting(), static_cast<double>(module->dcPower())});
|
|
}
|
|
|
|
return readings;
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::updateStorageCurrentPower(Thing *thing)
|
|
{
|
|
const QList<FroniusRules::ModuleReading> readings = storageModuleReadings(thing);
|
|
|
|
/* Not read yet, not "no battery". On the first blockUpdated the repeating
|
|
* blocks have just been created and carry no data, so nothing classifies.
|
|
* Warning here would put a false alarm in the journal of every healthy
|
|
* machine at every start - on the very line operations is told to trust to
|
|
* tell a broken storage from an unmeasurable one. Silence, and wait for the
|
|
* next cycle: readBlockData() runs on every refresh anyway. */
|
|
if (!FroniusRules::blocksAreIdentified(readings))
|
|
return;
|
|
|
|
if (!FroniusRules::hasBatteryBlocks(readings)) {
|
|
/* An inverter with no battery publishes N=2 and no StCha/StDisCha at
|
|
* all. Summing an empty set would answer a confident 0 W. */
|
|
if (!m_storagesWarnedWithoutPowerSource.contains(thing->id())) {
|
|
m_storagesWarnedWithoutPowerSource.insert(thing->id());
|
|
qCWarning(dcSunSpec()) << "Storage" << thing->name() << "has a model 160 but no StCha/StDisCha block:"
|
|
<< "currentPower has nothing to read and will stay at 0.";
|
|
}
|
|
return;
|
|
}
|
|
|
|
m_storagesWarnedWithoutPowerSource.remove(thing->id());
|
|
|
|
/* Charge minus discharge. The manufacturer counts the other way round and
|
|
* so does FroniusRules::batteryPower(); the interface this state belongs to
|
|
* counts a charging battery as consuming, hence positive. */
|
|
const double currentPower = FroniusRules::storageCurrentPower(readings);
|
|
thing->setStateValue(sunspecStorageCurrentPowerStateTypeId, currentPower);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::updateStorageCapacity(Thing *thing)
|
|
{
|
|
SunSpecNameplateModel *nameplate = m_storageNameplateModels.value(thing);
|
|
if (!nameplate)
|
|
return;
|
|
|
|
const double capacity = SunSpecStorageLogic::nameplateCapacityKwh(nameplate->whRtg());
|
|
if (capacity < 0) {
|
|
/* The nameplate does not carry a rated storage capacity. Left at its
|
|
* previous value rather than overwritten with a zero that would read
|
|
* as a measurement. */
|
|
qCDebug(dcSunSpec()) << "Storage" << thing->name() << "nameplate carries no WHRtg; capacity left untouched.";
|
|
return;
|
|
}
|
|
|
|
thing->setStateValue(sunspecStorageCapacityStateTypeId, capacity);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onStorageMpptBlockUpdated()
|
|
{
|
|
SunSpecModel *model = qobject_cast<SunSpecModel *>(sender());
|
|
if (!model)
|
|
return;
|
|
|
|
/* Several storage things may share one model 160 - one connection, one
|
|
* inverter, and in theory more than one storage block. */
|
|
foreach (Thing *thing, m_storageMpptModels.keys(qobject_cast<SunSpecMpptModel *>(model)))
|
|
updateStorageCurrentPower(thing);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onStorageNameplateBlockUpdated()
|
|
{
|
|
SunSpecModel *model = qobject_cast<SunSpecModel *>(sender());
|
|
if (!model)
|
|
return;
|
|
|
|
foreach (Thing *thing, m_storageNameplateModels.keys(qobject_cast<SunSpecNameplateModel *>(model)))
|
|
updateStorageCapacity(thing);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::onSolarEdgeBatteryBlockUpdated()
|
|
{
|
|
SolarEdgeBattery *battery = qobject_cast<SolarEdgeBattery *>(sender());
|
|
Thing *thing = battery->thing();
|
|
|
|
qCDebug(dcSunSpec()) << "SolarEdgeBattery: block data updated";// << battery->batteryData();
|
|
|
|
thing->setStateValue(solarEdgeBatteryConnectedStateTypeId, true);
|
|
|
|
QString chargingState = "idle";
|
|
switch (battery->batteryData().batteryStatus) {
|
|
case SolarEdgeBattery::Off:
|
|
chargingState = "idle";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Off");
|
|
break;
|
|
case SolarEdgeBattery::Standby:
|
|
chargingState = "idle";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Standby");
|
|
break;
|
|
case SolarEdgeBattery::Init:
|
|
chargingState = "idle";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Init");
|
|
break;
|
|
case SolarEdgeBattery::Charge:
|
|
chargingState = "charging";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Charging");
|
|
break;
|
|
case SolarEdgeBattery::Discharge:
|
|
chargingState = "discharging";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Discharging");
|
|
break;
|
|
case SolarEdgeBattery::Fault:
|
|
chargingState = "idle";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Fault");
|
|
break;
|
|
case SolarEdgeBattery::Holding:
|
|
chargingState = "idle";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Holding");
|
|
break;
|
|
case SolarEdgeBattery::Idle:
|
|
chargingState = "idle";
|
|
thing->setStateValue(solarEdgeBatteryBatteryStatusStateTypeId, "Idle");
|
|
break;
|
|
}
|
|
|
|
thing->setStateValue(solarEdgeBatteryBatteryCriticalStateTypeId, (battery->batteryData().stateOfEnergy < 5) && chargingState != "charging");
|
|
thing->setStateValue(solarEdgeBatteryBatteryLevelStateTypeId, battery->batteryData().stateOfEnergy);
|
|
thing->setStateValue(solarEdgeBatteryChargingStateStateTypeId, chargingState);
|
|
thing->setStateValue(solarEdgeBatteryRatedEnergyStateTypeId, battery->batteryData().ratedEnergy / 1000.0); // kWh
|
|
thing->setStateValue(solarEdgeBatteryAverageTemperatureStateTypeId, battery->batteryData().averageTemperature);
|
|
thing->setStateValue(solarEdgeBatteryInstantaneousVoltageStateTypeId, battery->batteryData().instantaneousVoltage);
|
|
thing->setStateValue(solarEdgeBatteryInstantaneousCurrentStateTypeId, battery->batteryData().instantaneousCurrent);
|
|
thing->setStateValue(solarEdgeBatteryCurrentPowerStateTypeId, battery->batteryData().instantaneousPower);
|
|
thing->setStateValue(solarEdgeBatteryMaxEnergyStateTypeId, battery->batteryData().maxEnergy / 1000.0); // kWh
|
|
thing->setStateValue(solarEdgeBatteryCapacityStateTypeId, battery->batteryData().availableEnergy / 1000.0); // kWh
|
|
thing->setStateValue(solarEdgeBatteryStateOfHealthStateTypeId, battery->batteryData().stateOfHealth);
|
|
thing->setStateValue(solarEdgeBatteryVersionStateTypeId, battery->batteryData().firmwareVersion);
|
|
}
|
|
|
|
void IntegrationPluginSunSpec::evaluateEnergyProducedValue(Thing *inverterThing, float energyProduced)
|
|
{
|
|
/* Note: on some systems the inverter sends for a longer period an absurdly
|
|
* high and wrong value for the produced energy (seen so far with SolarEdge inverters).
|
|
*
|
|
* In order to catch such situations, we need to verify if the state changed makes sense,
|
|
* or if the difference is to big for a regular produced energy value.
|
|
*
|
|
* Following scenarios need to be considered:
|
|
* - This is the first data value, we have no history to verify if this values makes sense
|
|
* - The system might be switched off for some time, the energy produced could be much more than the last known value
|
|
* - More than one value in a row could occure, not only single garbage data value
|
|
*/
|
|
|
|
StateTypeId energyProducedStateTypeId;
|
|
if (inverterThing->thingClassId() == sunspecSinglePhaseInverterThingClassId) {
|
|
energyProducedStateTypeId = sunspecSinglePhaseInverterTotalEnergyProducedStateTypeId;
|
|
} else if (inverterThing->thingClassId() == sunspecSplitPhaseInverterThingClassId) {
|
|
energyProducedStateTypeId = sunspecSplitPhaseInverterTotalEnergyProducedStateTypeId;
|
|
} else if (inverterThing->thingClassId() == sunspecThreePhaseInverterThingClassId) {
|
|
energyProducedStateTypeId = sunspecThreePhaseInverterTotalEnergyProducedStateTypeId;
|
|
} else {
|
|
qCWarning(dcSunSpec()) << "Could not evaluate energy produced value for ThingClassId" << inverterThing->thingClassId() << "The value will not be updated.";
|
|
return;
|
|
}
|
|
|
|
double currentEnergyValue = inverterThing->stateValue(energyProducedStateTypeId).toDouble();
|
|
if (currentEnergyValue <= 0) {
|
|
// Probably the initial value, no fancy data handling here
|
|
inverterThing->setStateValue(energyProducedStateTypeId, energyProduced);
|
|
} else {
|
|
double producedDiff = energyProduced - currentEnergyValue;
|
|
if (producedDiff > 10000 /*kWh*/) {
|
|
// The new energy value is way to high in order to be a reglar energy produced change...
|
|
qCWarning(dcSunSpec()) << "The energy produced value for" << inverterThing << "is way to high compared to the previouse value:"
|
|
<< currentEnergyValue << "kWh. Ignoring the value:" << energyProduced << "kWh.";
|
|
return;
|
|
} else {
|
|
// Not a huge jump, just set the value
|
|
inverterThing->setStateValue(energyProducedStateTypeId, energyProduced);
|
|
}
|
|
}
|
|
}
|